Custom forkliftable 8' flatbed with ladder rack and custom tool boxes. The flatbed was sandblasted and re-painted with PPG Omni line epoxy primer and poly urethane single stage paint. It has a new PT deck with new hardware and a new 1000lb remote controlled electric hoist on the back. The tool boxes are custom made by ProTech ind. and there is not another pair out there like them. A 6 gallon gas can will stand upright inside. For you landscapers out there, you can put all your tools inside these boxes. There is also uni-struts on the front passenger side box that two grey drawer cabinets will fit into perfectly for all the small contractor stuff (drawers not included). The tail lights and electrical harness are all new. The ladder rack is forklift ready (the rear crossbar is re-movable to clear the forklift load).
The bed was installed on a 2006 Dodge but was originally designed to go on a 1999 Ford truck. As one can see from the photos, it would be very easy to cut off the cross bars and center stands that I welded on and with some minor fabrication, it could go back onto a Ford. $5000 OBO call michael at