2010 Mark Williams 200” FED. Rolling Chassis was built by world known chassis builder Joe Haecker. Entire rest of the car built by North West car builder Butch Bowers. Motor built by the God Father of Blowers Gus Foster. FED is certified to 6.0”and s up to date. This is a 402 ci SBC World Product Block with 4 Bolt mains & .500 dia studs. Lunati Crank, Callies 6.0” rods, JE Pistons w/Dykes rings all good to 2,000 HP. Dart 2.100 Valves & O-ringed CNC heads with receiver in block and copper head gaskets. Howard cam. Art Austin .375 dia push rods. Jessel timing belt & Shaft rockers. 871-BDS blower & intake. MSD 20 Amp ignition. Waterman fuel pump with stainless steel fuel lines. Engine Dyno made 1,215 HP & 1,007 FT Lbs of torque. Ron Davis radiator. Cube delay box. Hughes 2-SP PG & 5,700 RPM torque converter w/bandit shifter. Mark Williams full floating blower rear-end w/3.89 gears. Altronics on board computer and weather station. Parachute & chrome wheelie bar. Trips the 60 Ft lights with rear tires. Best pass is 7.23 @ 193 MPH. Comes with ramps so you can store your golf cart above the FED in your trailer while traveling. Over $80K invested in this beautiful FED. Has won multiple races and show awards.