06 Undercover 4-link.
All the good stuff, assembled at the end of 2006 by Edmond Richardson.
Has just about every option available, dual chutes, Carbon Fiber Wing, 34.5 Hoosiers,
Weld Beadlocks, alot of chrome, killer paint job, dragster cover, lights everywhere for
racing at night (including front lights).
Lightened Strange 9" (4.10) gears + gun drilled axles.
Complete Racepak system.
Dedenbear electronics.
MSD 7AL3
Spinwerks front chrome wheels.
Great working car. Have motor plates for Chevy motor also.
Original paint is the bule/yellow (awesome paint job).
We had it wrapped (black/orange) for a couple years so all 3 of our cars matched.
Wrap was removed before the 2018 season and is back to the original blue/yellow paint.
622ci Aluminum MOPAR (buily by Best Machine)
Over $40k invested in this motor!
1108HP @ 7100
895 Torque @ 6200
Dyno sheets available
4.750 Stroke/4.565 Bore/4.840 Bore spacing/.250 Raised cam/60mm camshaft/4-7 swap
INDY spread bore aluminum block
Newest revision of INDY aluminum 600-13X (460cc) heads
Jesel Rockers & Belt drive
Moroso 4-vane vacuum pump
Charlies custom oil pan
Manton pushrods
Bushed lifter bores
Oil through pushrods & Spray bars in valve covers
COMP Elite roller lifters
Bob Book Carb (BRE 2-125)
GRP Billet rods
CP pistons
Reid transmission case & bell housing
Coan converter
Stinnett throttle stop
Stainless steel step headers. 2-1/4x2-3/8x2-1/2x5"
Currently setup for Super Comp. Runs 8.90 @ 179mph. One of, if not the fastest MOPAR
powered Super Comp dragsters in competition.
Will run low 7.s @ 185 on this single carb setup.
Have 83k invested.
Selling complete for 49k!!! Would seperate ONLY if motor sells first.
34k for motor/trans (carb to pan w/TS included & SS headers). 15k for dragster.
emai:
[email protected]
Cell: 712-253-4190
Videos/pictures on our website- www.roseracingteam.com