4,000 on (overhaul) included motor, trans and bumper to bumper sweep of every bearing, seal, bushing, brakes.....I have a detailed write up and 160 picture album of this process.
550hp 2.3L Whipple W140-AX ported supercharger, polished rotors, ported plenum, 42lbs SVT injectors, Walbro fuel pump, long tube headers, front mount Fluidyne Air to water intercooler, valve cover catch can, 2 handheld tuners (SCT and Predator)
Trans rebuild w/ Kevlar clutches, upgraded output shaft, and shift kit (servos) stock spare trans
All of the suspension is King Shocks racing components
Front- 4” wider per side and 1.5” forward
Cycles 19.5” but strapped at 18” front travel w/ 2.5x10” double bypass resi shock, 2.5x10” resi coil over, 2.5x4” hydraulic bump stop, billet uppers 3/4 rod ends, boxed lowers on hard poly bushings, lift spindle 1” uniball, billet tie rod extensions, all heim joints, SSBC 6 piston calipers stainless brake lines, abs sensors
Rear- triple bypass, new never used 2.5x4” hydraulic bump stops, D37 Deaver leaf spring pack, C notched frame, quick connect air ride for hauling a trailer or dirt bikes.
Extreme duty Currie enterprises 9 inch rear end trussed across the top and rear, with big bearing carrier and axle bearing set up, ARB air locker, disc brakes, drilled and slotted rotors all around.
Chromoly Baja bumpers, removable front light bar w/ 3 Baja Designs LaPaz HID’s, rear has class 3 hitch 4 and 7 pin trailer harness plugs, tow chain loops.
Fiberwerx 1 piece font clip w/ mini fenders and valance, 4” bulge 3” rise
Fiberwerx bedsides 4.5” bulge w/ billet fuel fill cap and stainless neck extension
50” Rigid LED light bar roof mounted on anN-Fab mount
ARB air compressor with aux hose adapter, air tools and a hose that reaches all 4 tires.
Amber Hella spot light pointed out of the rear on the bed cage .
Dual electric exhaust cutouts and magnaflow muffler
Lowrance GlobalMap 480c GPS
6.5” Pioneer touch screen navigation radio, back up camera, Sirius, Bluetooth, the whole 9 yards.
Loud Premium audio including under seat JL amp and woofer
5 Robby Gordon racing rims wrapped in 37” General Red Label Project race tires, full size spare mounted on the bolt in bed cage.
Custom 2 piece drive shaft w/ spare mounted in the bed.
Needs new-tints, minimal PDR, some fiberglass work on the grill and front clip (zues fitting has pulled through, small gash on the drivers side, hairline fractures in the gel coat)
and it’s not bad but could use powder coating on the bumpers, coil springs, rims, and bed cage.
That work can be negotiated and rectified pre sale if desired.
Trades welcome for anything with a motor of equal or lesser value, especially dirtbike, motorcycles, jet skis, even small planes. Projects welcome. Surf or dive equipment welcome
Any offers welcome!
Thanks in advance to any and all interested parties!