LS Chevy LS3 L92 REC port Blower Package - The Blower Shop 250 Complete with Manifold and Drive
Call us for Cathedral port style , we have it too
LS 3 and L92 Chevy- 250 Blower Setup - Complete Kit
Fits under hood usually with no modifications - overall height of manifold, blower and carb adapter is 10.56"
Solid Billet , with Billet 2 lobe rotors. Mirror like polishing.
makes PLENTY of boost for any engine up to 500 cu in - for Street or Marine use
Great Street sleeper blower to hide under the hood.
Requires a Short Water Pump
Street engines on pump gas will have to have 9-1 compression or less or use our Torco Octane booster to raise 93 octane to 103
Also Used in High Compression LS Chevy Race cars to add 3-4 lbs of boost to equalize Atmospheric
conditions when the air gets dirty, and/or corrected elevation and density altitude caused a negative impact on your ET .
A 71 style Supercharger sticking out of the hood is always a nice addition, but it may not be what you are looking for. With our 250 BilletCharger blower series we have solved that problem. Still producing the most boost in the industry these dangerously powerful blowers come in a beautifully small package. Perfect for tight clearances and low profile under-the-hood applications.
2 Lobe Straight Rotors w/ Teflon* will make 10-12 lbs boost on a 540
• Billet Case ◦ CNC machined 6061-T6 Aluminum
◦ Increased Strength over cast
◦ Hard Anodized Interior
◦ Mirror-Like Polish
◦ Low Profile Design (6.56” tall including Billet Carb Adaptor)
◦ Single or Dual Carb (4150 or 4500 *Please Specify when Ordering)
• 2 Lobe Rotors ◦ Billet Extrusion
◦ Teflon OD Stripping
◦ Full length rotor shaft for increased strength
◦ Maximum boost at low RPM
• Billet Bearing Plates ◦ Increased Strength over cast
◦ Hard Anodized
• Included: ◦ 250 Billet Supercharger with Snout
◦ Intake Manifold Tall Deck (4.31” tall, machined for water and Polished)
◦ Accessory Pulley 2V belt
◦ Supercharger Pulleys (*Please specify engine size and desired boost when ordering)
◦ Belt (16 Rib Serpentine style)
◦ Idler Assembly (Spring Tensioner, Pulley)
◦ All Necessary Gaskets and Hardware
◦ you will need a Aftermarket Balancer with a 6 bolt Blower Bolt pattern.