You could buy a generic SBC crate engine with way less power that was assembled in Mexico and made from no-name Chinese parts, but that's not how you roll. You've put a lot into your street ride and you want an engine to be proud of. It needs to have some real power, and both sound and look great.
While people tend to focus on horsepower, low-end torque is critical for a hot street ride. You want tire-shredding power on demand at low rpm when you stomp on the gas. This engine delivers 497 lb-ft of peak torque and an average of 464 lb-ft across the band of 3500 to 6500 rpm (see attached dyno sheet). Its ready when you are! Be sure to check out the dyno video with a good sound system to get of feel of what this would be like under your hood.
This one has your name on it. With a Dart SHP iron block as the foundation, you get priority main oiling along with a host of other strength and performance features. The precision-balanced rotating assembly consists of a Callies Compstar forged crank and rods set topped with a set of Diamond forged pistons. That is a stout short block!
For street rides, hydraulic roller cams are the only way to go. This engine features a custom grind from Comp Cam with CNC-machined roller rockers. Topside features Dart 23 degree SHP heads with billet roller rockers. These heads are mated with a Dart dual-plane aluminum manifold which is paired with a Holley Sniper EFI system. Bringing spark to light it all up is an Allstar point-style size distributor with vacuum advance and electronic ignition technology made of CNC-machined 6061-T6 aluminum.
The Holley Sniper EFI is a very powerful tool which works seamlessly with the distributor to control engine timing and air-fuel ratios. Vehicle connection for the EFI requires only 4 wires: battery +/-, switched ignition and RPM. Everything is included to completely plumb your fuel system including; 40 feet of 3/8” EFI Hose, in-line fuel pump, post and pre-fuel filters, return bulkhead, and all of the necessary fittings and hardware. The included handheld interface allows you to monitor engine operating conditions, set rev limits and control external devices such as fans.
An engine like this should look like it was made specifically for your ride. For finishing touches, we will work with you to achieve the exact look that you want on valve covers, paint, etc. Pricing includes the fabricated aluminum valve covers as shown. Ignition wires also come in a range of colors. With these custom touches, there will be no doubt that this engine belongs under the hood of your ride!
Call us now at 815-725-2727 or click BUT IT NOW to reserve yours. Need a transmission too? Let us know. We will help you select the one that is right for you.
This engine is covered by BOROWSKI RACE ENGINES, INC. LIMITED WARRANTY. Click BUY IT NOW for more details.
1. These engines are not pollution compliant and are intended for transportation use only in pre-pollution controlled vehicles.
2. All BRE engines are individually dyno tested and tuned. Customers will be supplied with video of their engine's dyno along with the dyno and build sheets.
Dyno results on the same engine are influenced by atmospheric conditions. The same engine can easily test +/- 2% different on horsepower depending upon ambient conditions. The engine you receive will have completed its dyno session at no less than 98% of rated horsepower with the tune we provide.
3. The final appearance of these engines is customized to the purchaser's specifications.