526 cubic inch 8.3 ltr MBR blown alochol engines, FRESH back from Miner, both have Newton billet blocks, billet MBR heads, cast magnesium intake manifolds, GRP rods, Arias pistons, Olson oil pans, cast magnesium timing covers, full valve train with valve covers, Crane cams, Morel 1 inch lifters, 2.600 intake valves, 1.950 exhaust valves, RCD crank hubs with crank trigger degree wheels, cranks have just been magged and polished with .010 under mains and standard rods, no oil pumps or pullys, both have fresh or new main caps, with fresh line hones, fresh honed or new sleeves, new rings, fresh valve jobs with 2.60 titanium intakes and stainless exhaust valves, fresh valve springs, everything between the two are interchangeable and still in great shape. Both engines are race ready and should be competitive and have both been in the 5.50's in an Alcohol Funny Car with a best of 5.52 259. One comes with new roller style MBR rocker assembly $24,000 the other with non roller rocker assembly $23,000 plus the ride. Compare to new one from MBR around $52k.
477 cubic inch cast 11.2 deck height, 4.375 bore, choice of 3.98 (477 ci), 4.00 (482 ci)or 4.25 (510 ci)crank shaft, engine in very nice shape, never windowed or hurt. comes with new crank, low run pistons and rods. Like new-fresh billet cylinder heads with NEW Victory 2.40 titanium intakes and Victory stainless exhaust valve, springs and new retainers, Manton push rods. Complete black rocker assembly, shafts, stands and rockers, magnesium MBR intake, black powder coated valve covers, magnesium front cover, magnesium side rails and back rail. Dan Olson oil pan, this engine will come fresh with new crank, cam and gears,assembled with new rings, bearings and gaskets, $19,000 plus the ride, or $15,000 less the crank, cam, front gears plus the ride.
11.2 deck height wet sump cast aluminum solid block, requires oil pump in the pan, no oil pump drive on front of block, machined off for funny car/dragster frame rail clearance, never windowed, has had perosity welded up and would need final machine work, line bore of block and cam tunnel line bore. Uses Chevrolet crank on mains with Chrysler hemi rod journals. $1,000.00 plus the ride.
11.2 deck height cast aluminum solid block with some slight perosity in block, never windowed, mains have three saddles, all machine work completed, needs sleeves. Has oil pump drive on front of block. Uses Oldsmobile 3" main crankshaft hemi rod journals. $3,000.00 plus the ride.
Crankshaft for above block available, 3" mains, recently checked, excellent condition $1400.00 plus the ride.
Crane blown alcohol camshaft for above blocks, excellent condition $300.00 plus the ride
2 sets of black rocker assemblies, non roller, complete in immaculate condition. $1400.00 set, OBO plus the ride.
Gold, later style rocker stands, shafts and non roller rockers, complete in immaculate conditon. $2200.00 plus the ride.
Stack of misc thickness copper head gaskets, 4:375 take all for $100.00 plus the ride
BRAND NEW, one single MBR-CNC latest design, billet cylinder head with springs, valves and retainers, $3500.00 plus the ride.
Billet MBR pair of single plug heads, assembled with 2.40 valves, springs and retainers, updated mods, nice condition $3500.00 plus the ride
Billet new style MBR pair of single plug heads with 2.60 valves, springs and retainers nice condition $5500.00 plus the ride.
10 ltr Arias fat water heads (rare), Black magnesium valve covers for these 10 ltr. fat heads, 3 push rod rocker assemblies and intake manifold for this combination, super hard to find, $5,000 OBO plus the ride.
Magnesium dual plug black powder coated valve covers $400.00 plus the ride.
Beautiful just reconditioned, TPR Australian three hole carbon fiber injector hat with aluminum front lip. $1600.00 plus the ride
Aluminum 8.3 ltr. square 12 quart funny car-dragster pan with windage tray, nice condition $300.00 plus the ride
Dan Olson 8.3 ltr. square 12 quart funny car-dragster pan with windage tray, like new, immaculate condition $500.00 plus the ride
Call me with what you might need and see if I can be of any assistance.
Call Dana Wardell (916) 849-3551 or e-mail [email protected]