Project for sale or trade, due to surgeries, a heart attack and house fire. Please see the pics to see the route i have gone. The original dash had deteriorated beyond repair, the previous owner hosed up the wiring, I have fixed some of it, the heater vacuum tubes we all broken and brittle, heater core has several holes, a/c was almost non existing. Heater/AC box has been removed see pics. All glass is good no cracks. Doors open and close as they should with no serious sagging. I do have the Tailgate but it doesn't latch and if you get it latched you can't open it back up.
So here i how i went, purchased a reman'd 360, since that was what came in it. installed put about 500 miles on it, found out that there were no places making the heater core, dash and inner fender wells. so after much thought i decided to go for the Street/Strip Rod truck, pulled the dash, heater/ac assembly, removed and sold the reman'd 360 and tranny,
Purchased a reman'd 440 short block, here is a list of parts I used to build the 440:
Mopar Performance Purple Camshaft Kit P4120235AE
Milodon 4x4 Truck and Off-Road Oil Pans 30890
Milodon Oil Pump Pickups 18455
Milodon Stainless Steel Oil Dipsticks 22040
Mr. Gasket Ultra-Seal Gasket Sets 5994
Summit Racing® M2008 Series Carburetors SUM-M08750MS
B&M Flexplates 10230
B&M Tork Master Torque Converters 10417
Edelbrock Torker II Intake Manifolds 5091
Melling High-Volume Oil Pumps M63HV
Hedman Street Headers 79220
March Performance Ultra Series Billet Aluminum Alternator Brackets 40010-09
From 440 Source:
200-1055 --Stealth Aluminum Cylinder Head - COMPLE2 $999.90
109-1514 Bolt Kit - Cylinder Head 12pt. 1 $58.95
200-1104 Billet Aluminum "V-Groove" Crank Pulley1 $69.95
200-1106 Billet Aluminum "V-Groove" Water Pump P1 $69.95
129-1041 ARP Bolt Kit - Bellhousing - Polished S1 $28.95
109-1503 Bolt/washer - Damper to Crankshaft - Sh1 $9.95
109-1517 Bolt Kit for Billet Alum Crank Pulleys 1 $9.95
129-1030 ARP Stud Kit (long) - Valve Covers 1 $39.95
109-1516 Starter Attachment Bolt Kit 1 $12.95
129-1031 ARP Bolt Kit - Fuel Pump Blockoff or Wa1 $8.95
Spicer Drivetrain Products Differential Carriers 80754 (not installed yet):
Before ordering the Heads from 440 Source, I called and spoke to them and gave them all the information for my build, to achieve my goal of 440-450hp, they suggested the parts above such as, intake, carb, headers and cam kit and the Stealth heads. They stated that should get me to the hp I was shooting for.
in the engine alone there is just over $5000, that includes the posi unit, still in the box, 20 gal fuel cell, holley black pump, battery relocated to bed. for the rest of the truck, bucket seats from a Ram Charger with console, aluminum dash currently taped in place, gauges not purchased at this time, but do have a full set of new that might go with the truck for the right price, black D slot Rims, backs are 10's with N50/15's, the tread is 13" wide. Also have a second Pair of 10's. Tranny is shift kitted, no exhaust after headers at this time. New passenger side fender not installed, front dog house is disassembled for installation of motor and to clean up corrosion from the factory battery box, on the inner fender well, have new radiator and also not installed is the March power steering brackets.Tires are new and have only seen pavement once when the 360 was in the truck.
The bed has been coated prior to fuel cell and battery box install, fuel lines need ran, have all the materials for the fuel lines and battery lines. Inner fender wells have been stripped and painted. Have two hoods, have original poli fuel tank and hangers, have original right fender it is streight just has a crack in it. so purchased a new one that come with a small dent along the top.
Prefer to sale the entire project and not part out. but if you just want the motor and tranny then they will be $6000. header to header, trans to pulleys and carb to pan.
Truck, Entire Rust Free(few surface rust spots) project with all the parts I have: $7000 cash or trade.