Questions & Answers about this ad

Question:

hello i have a 615 bbc tunnel ram/ sheet metal/intake, drilled for fogger 1/8 npt holes. i need just a simple eng fogger kit installed, i will ship intake to u with a return label. give me your best price on supply and install. regards michael

Answer:

hey michael the holes in your intake are 1/8" pipe they should be 1/16" 27 pipe i will have to put inserts in to get the size back for the nozzles. price on the kit with incerts and plumbed would be $724 give me a call at the shop if you decide to ship your manifold so we knowwhat linkage and carbs your using thanks daveOn [2007-02-23 09:21:03] stroker wrote: > hello > i have a 615 bbc tunnel ram/ sheet metal/intake, drilled for fogger 1/8 npt holes. > i need just a simple eng fogger kit installed, i will ship intake to u with a return label. give me your best price on supply and install. > regards > michael >

Questions & Answers about this ad

Question:

id like more info on getting my fogger plumed for an intake. i have SBC 4500 intake, i think im going to go with the new worlds intake, they claim that intake gives abou 30HP alone. i need to get it ported 1st, unless you do that. if you port intakes, that would be great too. that way, ill just send u my intake and fogger nitrous kit. i only bought the nitrous fogger kit because i had plenty of bottles, lines, etc

Answer:

yes we can port your manifold we will need the intake gasket that matches your head port and cost on full port would be $450 port match would be $175 and to plumb intake would be $150 give me a call at the shop if you are shipping your manifold so we can go over details thanks dave shop #(215)949-8786 On [2007-03-08 00:29:15] chevycam1970 wrote: > id like more info on getting my fogger plumed for an intake. i have SBC 4500 intake, i think im going to go with the new worlds intake, they claim that intake gives abou 30HP alone. i need to get it ported 1st, unless you do that. if you port intakes, that would be great too. that way, ill just send u my intake and fogger nitrous kit. i only bought the nitrous fogger kit because i had plenty of bottles, lines, etc

Questions & Answers about this ad

Question:

also, how much would it cost me for you to run the lines from the fuel solenoids, both lines and put the fittings on each end so all i have to do is to connect them to the regulator. i want the good thick lines like in the picture. i can handle the lines from the nitrous solenoids, etc. how much extra for me to get the intake/fogger back with both lines coming from the fuel solenoids and the correct fittings on the end so all i have to do is connect them to the fittings on my regulator. let me know On [2007-03-08 10:25:29] mrnos wrote: > yes we can port your manifold we will need the intake gasket that matches your head port and cost on full port would be $450 port match would be $175 and to plumb intake would be $150 give me a call at the shop if you are shipping your manifold so we can go over details thanks dave shop #(215)949-8786 > > On [2007-03-08 00:29:15] chevycam1970 wrote: > > id like more info on getting my fogger plumed for an intake. i have SBC 4500 intake, i think im going to go with the new worlds intake, they claim that intake gives abou 30HP alone. i need to get it ported 1st, unless you do that. if you port intakes, that would be great too. that way, ill just send u my intake and fogger nitrous kit. i only bought the nitrous fogger kit because i had plenty of bottles, lines, etc >

Answer:

we take visa mastercard or paypal i need your zip code for a aprox shipping and box fee and would need to know what regulater you are using for your nitrous so i can give you a price on lines and fittings installed thanks dave On [2007-03-09 00:38:45] chevycam1970 wrote: > also, how much would it cost me for you to run the lines from the fuel solenoids, both lines and put the fittings on each end so all i have to do is to connect them to the regulator. i want the good thick lines like in the picture. i can handle the lines from the nitrous solenoids, etc. how much extra for me to get the intake/fogger back with both lines coming from the fuel solenoids and the correct fittings on the end so all i have to do is connect them to the fittings on my regulator. let me know > > On [2007-03-08 10:25:29] mrnos wrote: > > yes we can port your manifold we will need the intake gasket that matches your head port and cost on full port would be $450 port match would be $175 and to plumb intake would be $150 give me a call at the shop if you are shipping your manifold so we can go over details thanks dave shop #(215)949-8786 > > > > On [2007-03-08 00:29:15] chevycam1970 wrote: > > > id like more info on getting my fogger plumed for an intake. i have SBC 4500 intake, i think im going to go with the new worlds intake, they claim that intake gives abou 30HP alone. i need to get it ported 1st, unless you do that. if you port intakes, that would be great too. that way, ill just send u my intake and fogger nitrous kit. i only bought the nitrous fogger kit because i had plenty of bottles, lines, etc > > >

Questions & Answers about this ad

Question:

do you think the big port regulator is wrong for the fogger? should i go with the smaller holley regulator, the max pressure regulator or just stick with the 1 i got, which is the big port regulator. i have part number HLY-12-704, should i stick with that 1 or is there another 1 thats ideal for the fogger? On [2007-03-09 11:17:09] mrnos wrote: > we take visa mastercard or paypal i need your zip code for a aprox shipping and box fee and would need to know what regulater you are using for your nitrous so i can give you a price on lines and fittings installed thanks dave > > On [2007-03-09 00:38:45] chevycam1970 wrote: > > also, how much would it cost me for you to run the lines from the fuel solenoids, both lines and put the fittings on each end so all i have to do is to connect them to the regulator. i want the good thick lines like in the picture. i can handle the lines from the nitrous solenoids, etc. how much extra for me to get the intake/fogger back with both lines coming from the fuel solenoids and the correct fittings on the end so all i have to do is connect them to the fittings on my regulator. let me know > > > > On [2007-03-08 10:25:29] mrnos wrote: > > > yes we can port your manifold we will need the intake gasket that matches your head port and cost on full port would be $450 port match would be $175 and to plumb intake would be $150 give me a call at the shop if you are shipping your manifold so we can go over details thanks dave shop #(215)949-8786 > > > > > > On [2007-03-08 00:29:15] chevycam1970 wrote: > > > > id like more info on getting my fogger plumed for an intake. i have SBC 4500 intake, i think im going to go with the new worlds intake, they claim that intake gives abou 30HP alone. i need to get it ported 1st, unless you do that. if you port intakes, that would be great too. that way, ill just send u my intake and fogger nitrous kit. i only bought the nitrous fogger kit because i had plenty of bottles, lines, etc > > > > > >

Answer:

your reg. will be fine On [2007-03-11 03:12:30] chevycam1970 wrote: > do you think the big port regulator is wrong for the fogger? should i go with the smaller holley regulator, the max pressure regulator or just stick with the 1 i got, which is the big port regulator. i have part number HLY-12-704, should i stick with that 1 or is there another 1 thats ideal for the fogger? > > On [2007-03-09 11:17:09] mrnos wrote: > > we take visa mastercard or paypal i need your zip code for a aprox shipping and box fee and would need to know what regulater you are using for your nitrous so i can give you a price on lines and fittings installed thanks dave > > > > On [2007-03-09 00:38:45] chevycam1970 wrote: > > > also, how much would it cost me for you to run the lines from the fuel solenoids, both lines and put the fittings on each end so all i have to do is to connect them to the regulator. i want the good thick lines like in the picture. i can handle the lines from the nitrous solenoids, etc. how much extra for me to get the intake/fogger back with both lines coming from the fuel solenoids and the correct fittings on the end so all i have to do is connect them to the fittings on my regulator. let me know > > > > > > On [2007-03-08 10:25:29] mrnos wrote: > > > > yes we can port your manifold we will need the intake gasket that matches your head port and cost on full port would be $450 port match would be $175 and to plumb intake would be $150 give me a call at the shop if you are shipping your manifold so we can go over details thanks dave shop #(215)949-8786 > > > > > > > > On [2007-03-08 00:29:15] chevycam1970 wrote: > > > > > id like more info on getting my fogger plumed for an intake. i have SBC 4500 intake, i think im going to go with the new worlds intake, they claim that intake gives abou 30HP alone. i need to get it ported 1st, unless you do that. if you port intakes, that would be great too. that way, ill just send u my intake and fogger nitrous kit. i only bought the nitrous fogger kit because i had plenty of bottles, lines, etc > > > > > > > > > >

Questions & Answers about this ad

Question:

looking for a fogger system for my 406 SBC. Need intake already plumbed and ready to go. Dont need bottle. I am running a 4150 carb can you help? Need to save as much as possible.

Answer:

let me know what cyl. heads you have and i will give you a total package price On [2007-03-11 16:09:56] faith624 wrote: > looking for a fogger system for my 406 SBC. Need intake already plumbed and ready to go. Dont need bottle. I am running a 4150 carb can you help? Need to save as much as possible.

Questions & Answers about this ad

Question:

please send your paypal address, and i will go ahead and pay you the $325 plus overnite shipping back to me, and you can do it whenever jegs or summit, whomever i order from gets it to your door. let me know, how that sound and we can go from there. i can go ahead and pay you today, just send me the paypal address and what you think the total would be, for overnite shipping. it will be $325 plus the price of overnite shipping or 2day air shipping back to me plus the price of the lines and fittings from the fuel solenoids. ive already told you what i wanted for that, which is both lines from the solenoids, as well as the fittings on the end of the lines so all i have to do is connect them to the fittings on the regulator. let me know what to send you via paypal, and ill get it to you tomorrow On [2007-03-09 11:17:09] mrnos wrote: > we take visa mastercard or paypal i need your zip code for a aprox shipping and box fee and would need to know what regulater you are using for your nitrous so i can give you a price on lines and fittings installed thanks dave > > On [2007-03-09 00:38:45] chevycam1970 wrote: > > also, how much would it cost me for you to run the lines from the fuel solenoids, both lines and put the fittings on each end so all i have to do is to connect them to the regulator. i want the good thick lines like in the picture. i can handle the lines from the nitrous solenoids, etc. how much extra for me to get the intake/fogger back with both lines coming from the fuel solenoids and the correct fittings on the end so all i have to do is connect them to the fittings on my regulator. let me know > > > > On [2007-03-08 10:25:29] mrnos wrote: > > > yes we can port your manifold we will need the intake gasket that matches your head port and cost on full port would be $450 port match would be $175 and to plumb intake would be $150 give me a call at the shop if you are shipping your manifold so we can go over details thanks dave shop #(215)949-8786 > > > > > > On [2007-03-08 00:29:15] chevycam1970 wrote: > > > > id like more info on getting my fogger plumed for an intake. i have SBC 4500 intake, i think im going to go with the new worlds intake, they claim that intake gives abou 30HP alone. i need to get it ported 1st, unless you do that. if you port intakes, that would be great too. that way, ill just send u my intake and fogger nitrous kit. i only bought the nitrous fogger kit because i had plenty of bottles, lines, etc > > > > > >

Answer:

i just need your zip code for a shipping quote On [2007-03-12 02:51:31] chevycam1970 wrote: > please send your paypal address, and i will go ahead and pay you the $325 plus overnite shipping back to me, and you can do it whenever jegs or summit, whomever i order from gets it to your door. let me know, how that sound and we can go from there. i can go ahead and pay you today, just send me the paypal address and what you think the total would be, for overnite shipping. it will be $325 plus the price of overnite shipping or 2day air shipping back to me plus the price of the lines and fittings from the fuel solenoids. ive already told you what i wanted for that, which is both lines from the solenoids, as well as the fittings on the end of the lines so all i have to do is connect them to the fittings on the regulator. let me know what to send you via paypal, and ill get it to you tomorrow > > On [2007-03-09 11:17:09] mrnos wrote: > > we take visa mastercard or paypal i need your zip code for a aprox shipping and box fee and would need to know what regulater you are using for your nitrous so i can give you a price on lines and fittings installed thanks dave > > > > On [2007-03-09 00:38:45] chevycam1970 wrote: > > > also, how much would it cost me for you to run the lines from the fuel solenoids, both lines and put the fittings on each end so all i have to do is to connect them to the regulator. i want the good thick lines like in the picture. i can handle the lines from the nitrous solenoids, etc. how much extra for me to get the intake/fogger back with both lines coming from the fuel solenoids and the correct fittings on the end so all i have to do is connect them to the fittings on my regulator. let me know > > > > > > On [2007-03-08 10:25:29] mrnos wrote: > > > > yes we can port your manifold we will need the intake gasket that matches your head port and cost on full port would be $450 port match would be $175 and to plumb intake would be $150 give me a call at the shop if you are shipping your manifold so we can go over details thanks dave shop #(215)949-8786 > > > > > > > > On [2007-03-08 00:29:15] chevycam1970 wrote: > > > > > id like more info on getting my fogger plumed for an intake. i have SBC 4500 intake, i think im going to go with the new worlds intake, they claim that intake gives abou 30HP alone. i need to get it ported 1st, unless you do that. if you port intakes, that would be great too. that way, ill just send u my intake and fogger nitrous kit. i only bought the nitrous fogger kit because i had plenty of bottles, lines, etc > > > > > > > > > >

Questions & Answers about this ad

Question:

Hi Dave I did forget to ask you what weight and brand oil you ran in the 632 I bought from you we plan on taking the rail out next sat for its 1st run,thanks for all your help.Anthony I did find local fuel for the motor it has a octane 117 instead of 119 what do think? and all the other items are in the fuel that we can read about.

Answer:

anthony i ran torco t4r 20w 50 oil and vp c23 i dont know about the 117 octain stuff let me know how you make out dave On [2007-06-03 17:32:23] anthonysciulli wrote: > Hi Dave I did forget to ask you what weight and brand oil you ran in the 632 I bought from you we plan on taking the rail out next sat for its 1st run,thanks for all your help.Anthony I did find local fuel for the motor it has a octane 117 instead of 119 what do think? and all the other items are in the fuel that we can read about.

Questions & Answers about this ad

Question:

Thanks for the info.one last question since there is no dip stick, how many quarts? On [2007-06-03 22:01:56] mrnos wrote: > anthony i ran torco t4r 20w 50 oil and vp c23 i dont know about the 117 octain stuff let me know how you make out dave > > On [2007-06-03 17:32:23] anthonysciulli wrote: > > Hi Dave I did forget to ask you what weight and brand oil you ran in the 632 I bought from you we plan on taking the rail out next sat for its 1st run,thanks for all your help.Anthony I did find local fuel for the motor it has a octane 117 instead of 119 what do think? and all the other items are in the fuel that we can read about. >

Answer:

8 quarts On [2007-06-04 06:15:58] anthonysciulli wrote: > Thanks for the info.one last question since there is no dip stick, how many quarts? > > > On [2007-06-03 22:01:56] mrnos wrote: > > anthony i ran torco t4r 20w 50 oil and vp c23 i dont know about the 117 octain stuff let me know how you make out dave > > > > On [2007-06-03 17:32:23] anthonysciulli wrote: > > > Hi Dave I did forget to ask you what weight and brand oil you ran in the 632 I bought from you we plan on taking the rail out next sat for its 1st run,thanks for all your help.Anthony I did find local fuel for the motor it has a octane 117 instead of 119 what do think? and all the other items are in the fuel that we can read about. > > >

Questions & Answers about this ad

Question:

price to plumb strip dominator for fogger and turn around time

Answer:

to drill tap and plumb would be $225 plus shipping you supply the kit my kit with 2 tune ups is an extra $599 so total you sending me your intake would be $824 plus shipping thanks dave On [2007-06-04 23:42:23] skb wrote: > price to plumb strip dominator for fogger and turn around time

Questions & Answers about this ad

Question:

HI DAVE WE HAD THE 632 OUT at Quaker Raceway BEST IT DID, WAS 7.262 176.33mph fuel press 5.75 taking out 8 deg 60ft 1.054 Lanching @ 3400 rpm shifting @ 7200 rpm Anything you might add would be greatful thanks again Tony

Answer:

tony i would raise the launch to 4200 and shift at 7500 and may be try a 34 nitrous jet and 30 fuel jet and 10 to 12 degree retard at 6psi flowing the mph seems to be low for the et also On [2007-07-22 13:10:01] anthonysciulli wrote: > HI DAVE WE HAD THE 632 OUT at Quaker Raceway BEST IT DID, WAS 7.262 176.33mph fuel press 5.75 > taking out 8 deg > 60ft 1.054 > Lanching @ 3400 rpm > shifting @ 7200 rpm > Anything you might add would be greatful thanks again Tony

Questions & Answers about this ad

Question:

I have a Hogan manifold that has a pair of Applied Nitrous Tech foggers. I am looking to add a third system possibly underneath the manifold or possibly an internal spraybar. Can you give me some idea on pricing to add a third system including the system itself as well as possibly re plumbing the existing foggers. The way ANY did the fogger systems, it takes up a lot of room on the manifold and I am having trouble getting a scoop wide enough to cover all of the nitrous. This system is on an NMRA Outlaw 10.5 / ORSCA L/S Mustang and it is a C460 motor. I can send pics of the manifold to you if you provide an email address. Thanks, Marshall

Answer:

hi marshall send your pics of your manifold to my email dave.acker@gmail.com and i will give you pricing and what we can do for you thanks dave On [2007-08-18 10:47:46] marshalllhancock wrote: > I have a Hogan manifold that has a pair of Applied Nitrous Tech foggers. I am looking to add a third system possibly underneath the manifold or possibly an internal spraybar. Can you give me some idea on pricing to add a third system including the system itself as well as possibly re plumbing the existing foggers. The way ANY did the fogger systems, it takes up a lot of room on the manifold and I am having trouble getting a scoop wide enough to cover all of the nitrous. This system is on an NMRA Outlaw 10.5 / ORSCA L/S Mustang and it is a C460 motor. I can send pics of the manifold to you if you provide an email address. > > Thanks, > Marshall

Questions & Answers about this ad

Question:

the kit you have is fully adjustable from 50-200? is there instructioins on istallation, i'm a first time user. is the kit brand new or used? On [2007-08-21 16:02:17] mrnos wrote: > Yes. Have complete kit including bottle for $425.00. > > On [2007-08-21 08:00:06] chris22 wrote: > > I'm looking to buy a Plate system for my camaro i want an adjustable system from 50-200hp do you have kits like this? >

Answer:

yes there will be instructions and yes it is a new kit On [2007-08-23 16:03:28] chris22 wrote: > the kit you have is fully adjustable from 50-200? is there instructioins on istallation, i'm a first time user. is the kit brand new or used? > > On [2007-08-21 16:02:17] mrnos wrote: > > Yes. Have complete kit including bottle for $425.00. > > > > On [2007-08-21 08:00:06] chris22 wrote: > > > I'm looking to buy a Plate system for my camaro i want an adjustable system from 50-200hp do you have kits like this? > > >

Questions & Answers about this ad

Question:

plate for now. On [2007-08-22 16:45:50] mrnos wrote: > Need plate style or direct port system? > > On [2007-08-21 21:20:24] shorty110670 wrote: > > how much for your custom nitrous systems?what power range? >

Answer:

our custom plates start at $ 259.99 On [2007-08-22 16:47:12] shorty110670 wrote: > plate for now. > > On [2007-08-22 16:45:50] mrnos wrote: > > Need plate style or direct port system? > > > > On [2007-08-21 21:20:24] shorty110670 wrote: > > > how much for your custom nitrous systems?what power range? > > >

Questions & Answers about this ad

Question:

ok, and this kit is fully adjustable from 50-200? On [2007-08-28 12:11:59] mrnos wrote: > Williamsport PA is up state, about a 5 to 6 hour drive. Levittown PA is about 20 minutes away from the city of Philadelphia. We ship out UPS with our own account & would not be expensive to ship to your location. > > On [2007-08-28 12:06:04] chris22 wrote: > > where is levittown pa? i live by williamsport pa, about how far are you from there? > > > > On [2007-08-28 10:32:13] mrnos wrote: > > > yes there will be instructions and yes it is a new kit > > > > > > On [2007-08-23 16:03:28] chris22 wrote: > > > > the kit you have is fully adjustable from 50-200? is there instructioins on istallation, i'm a first time user. is the kit brand new or used? > > > > > > > > On [2007-08-21 16:02:17] mrnos wrote: > > > > > Yes. Have complete kit including bottle for $425.00. > > > > > > > > > > On [2007-08-21 08:00:06] chris22 wrote: > > > > > > I'm looking to buy a Plate system for my camaro i want an adjustable system from 50-200hp do you have kits like this? > > > > > > > > > > > > > > >

Answer:

yes On [2007-08-28 12:21:25] chris22 wrote: > ok, and this kit is fully adjustable from 50-200? > > On [2007-08-28 12:11:59] mrnos wrote: > > Williamsport PA is up state, about a 5 to 6 hour drive. Levittown PA is about 20 minutes away from the city of Philadelphia. We ship out UPS with our own account & would not be expensive to ship to your location. > > > > On [2007-08-28 12:06:04] chris22 wrote: > > > where is levittown pa? i live by williamsport pa, about how far are you from there? > > > > > > On [2007-08-28 10:32:13] mrnos wrote: > > > > yes there will be instructions and yes it is a new kit > > > > > > > > On [2007-08-23 16:03:28] chris22 wrote: > > > > > the kit you have is fully adjustable from 50-200? is there instructioins on istallation, i'm a first time user. is the kit brand new or used? > > > > > > > > > > On [2007-08-21 16:02:17] mrnos wrote: > > > > > > Yes. Have complete kit including bottle for $425.00. > > > > > > > > > > > > On [2007-08-21 08:00:06] chris22 wrote: > > > > > > > I'm looking to buy a Plate system for my camaro i want an adjustable system from 50-200hp do you have kits like this? > > > > > > > > > > > > > > > > > > > > >

Questions & Answers about this ad

Question:

Do you sell just the fogger kits without bottles? If so how much? Thanks alot Josh

Answer:

yes we do they start at $599 On [2007-09-06 00:05:37] happydog wrote: > Do you sell just the fogger kits without bottles? If so how much? Thanks alot Josh