For sale a very high dollar piece. Mopar performance R1 block 9.0 deck height, fresh from machine shop and ready to asseble. 4 bolt billet mains, 6 head bolts per cylinder, 48 degree tappet angle, roller cam bearings.......Brand new Groden aluminum rods. New H-Bearings, rings, and JE pistons. Forged crank, fresh, ready to run. Comp cams 640 solid roller camshaft, JESEL keyway lifters. Approx 13.5-14. to 1 compression, depending on head gasket thickness.

W9 heads, fully ported by shady dell speed shop. T&D roller rockers, new valves, springs, retainers and locks. Zero run time on fresh heads. There's well over 6k invested in these heads alone. Should flow 355-365 cfm on the intake side. Comes with W9 intake, and brand new fab valve covers.



Also arrow racing timing cover, csi electric water pump, pushrods, fluidampner, timing chain and tensioner.....

Way too much to list......well over 12k to build this motor.....

Please don't waiste my time if you don't have $

$7,500 is a SMOKING deal on this set up

SEE OTHER AD FOR PICTURES

Seller Phone Number: 805-423-4157

Seller Phone Number2: 805-466-9149

This item is USED

Trades NOT ACCEPTED

Payment options:

Cash

Item Location: ATASCADERO, CA Get Directions

This ad expired 24 days ago.