Ad #1187025 Posted:2008-04-22 18:44:10
This ad expired 140 days ago.
2004 White T&E Aluminum Custom Race Trail
$40,000.00
2004 White T&E Aluminum Pull-a-Long Custom Race Trailer
Vehicle Description
You are looking at a cutom built trailer for snowmobile grass racing. Trailer has never seen winter and is stored in heated shed and has been used appr. 20 times. Trailer has pretty much every option including full canopy with sides to drive in and out, yellow in color and used twice. The following is the list of options. Trailer is in great shape for being 4yrs.old.
-26'box -31'overall
-3 axles
-Lightweight aluminum extruded floor/frame
-.050 aluminum wall exterior w/aluminum uprights with rivets on 4' centers
-.04 2 piece aluminum roof over aluminum roof bows
-white-standard color
-102" wide - 81" between fenderwells
-10 ply radial tired 16"
-Spare tire and wheel
-6'9" interior height
-6000# dexter slipper spring axles - 8 lug hubs
-4 - 12volt loading lights on one switch
-48" side dorr w/ recessed door lock
-all aluminum ramp door w/spring & 2 recessed stainless camlocks - ATP on iside of door ramp
-tongue jack-manual
-break-a-way switch
-2 5/16" coupler
-4 D ringgs loose
-Alcoa 16"x7" aluminum wheels
-Steel axle supports and steel tongue
-On-side turn signals
-insulate walls and ceiling with blueboard insulation
-cover interior walls and ceiling with white .04 aluminum inlcuding shiny aluminum extruded wire cover at ceiling
-9' interior height and 129" ext. height
-stainless steel rock guard for pull-a-long trailer
-poliished extrusion package
-ext.ladder for front of trailer
-stand on roof area 8'x12" with observation railing
-.063 sheeting in place of standard .05 aluminum sheeting, white with rivets on 4' centers
-arrow awning 25'x13', 1 color with quick disconnect arms
-awning mounting inside
-install a window in 48" side door
-clear vinyl strip curtains for side doors with bracket to hold on wall when not in use
-clear vinyl strip curtains to partition rear of trailer or for rear door with bracket to hold on wall when not in use
-48" extruded side door step, flip up
-24" rear ramp door extension
-shiny stainless steel on normal size ramp door
-T&E custom built platform 4 pt. lift, all aluminum, hydraulic with full floor, 20'long
-cover bottom of lift with white
-13,500 BTU roof air with heat trip, controlls on side wall
-non-ducted furnace L.P. installed on road side rear of L-shaped work bench with thermostat
-Add L.P. gas system with detector which will be in front mount stainless steel generator
-install your portable generator
-slides for generator to slide forward and shelf for generator
-front mount stainless gererator compartments with mesh and doors and area for air compressor-generator-L.P. bottles and 2 batteries
-air line package including 2 ext. and 2 int. air outlet. 1 ext. in front of fender curb side and 1 ext. to back of fenderwell on road side
-carpet on wall 36" high per linear ft.
-D rings installed
-steel painted e-track per linear foot installed 12'-6' at rear curb side corner and 6' at rear road side corner
-fuel jug rail for square fuel jugs
-63 1/2 x 6'x 24" deep x 32" tall l-shaped top cabinet with aluminum doors
-stainless top for above bench with 1 radius corner
- 6'x6'x16" deep x 32" tall l-shaped top cabinet with aluminum doors
-install lista tool box front curb side corner with workbench
-above this tool box and closet
-install shiny stainless steel 2'down bottom side of trailer both sides
-add 4' flip bench by arrow that will also mount inside trailer
-add raidus frnt. corners to trailer but use large side bottom extrusion across frnt of trailer
-water system 35 gallons
-standard light package
-fluorescent lights
-50 amp fuse box
-1 shore power outlet
-2 int. switches
-4 int. receptables
-under cabinet lights
-quartz flood lights recessed into side of trailer and mounted in an aluminum box
-air compressor
-prewire for sound system
-4.5lb. winchmounted in center of workbench
-electric tongue jack
-12V battery disconnect switch
-12V batery box
-12V battery charger
-build heavy duty 25' cord
-add back up lights
-upgrade to LED lights on ext. of trailer
Vehicle Description
You are looking at a cutom built trailer for snowmobile grass racing. Trailer has never seen winter and is stored in heated shed and has been used appr. 20 times. Trailer has pretty much every option including full canopy with sides to drive in and out, yellow in color and used twice. The following is the list of options. Trailer is in great shape for being 4yrs.old.
-26'box -31'overall
-3 axles
-Lightweight aluminum extruded floor/frame
-.050 aluminum wall exterior w/aluminum uprights with rivets on 4' centers
-.04 2 piece aluminum roof over aluminum roof bows
-white-standard color
-102" wide - 81" between fenderwells
-10 ply radial tired 16"
-Spare tire and wheel
-6'9" interior height
-6000# dexter slipper spring axles - 8 lug hubs
-4 - 12volt loading lights on one switch
-48" side dorr w/ recessed door lock
-all aluminum ramp door w/spring & 2 recessed stainless camlocks - ATP on iside of door ramp
-tongue jack-manual
-break-a-way switch
-2 5/16" coupler
-4 D ringgs loose
-Alcoa 16"x7" aluminum wheels
-Steel axle supports and steel tongue
-On-side turn signals
-insulate walls and ceiling with blueboard insulation
-cover interior walls and ceiling with white .04 aluminum inlcuding shiny aluminum extruded wire cover at ceiling
-9' interior height and 129" ext. height
-stainless steel rock guard for pull-a-long trailer
-poliished extrusion package
-ext.ladder for front of trailer
-stand on roof area 8'x12" with observation railing
-.063 sheeting in place of standard .05 aluminum sheeting, white with rivets on 4' centers
-arrow awning 25'x13', 1 color with quick disconnect arms
-awning mounting inside
-install a window in 48" side door
-clear vinyl strip curtains for side doors with bracket to hold on wall when not in use
-clear vinyl strip curtains to partition rear of trailer or for rear door with bracket to hold on wall when not in use
-48" extruded side door step, flip up
-24" rear ramp door extension
-shiny stainless steel on normal size ramp door
-T&E custom built platform 4 pt. lift, all aluminum, hydraulic with full floor, 20'long
-cover bottom of lift with white
-13,500 BTU roof air with heat trip, controlls on side wall
-non-ducted furnace L.P. installed on road side rear of L-shaped work bench with thermostat
-Add L.P. gas system with detector which will be in front mount stainless steel generator
-install your portable generator
-slides for generator to slide forward and shelf for generator
-front mount stainless gererator compartments with mesh and doors and area for air compressor-generator-L.P. bottles and 2 batteries
-air line package including 2 ext. and 2 int. air outlet. 1 ext. in front of fender curb side and 1 ext. to back of fenderwell on road side
-carpet on wall 36" high per linear ft.
-D rings installed
-steel painted e-track per linear foot installed 12'-6' at rear curb side corner and 6' at rear road side corner
-fuel jug rail for square fuel jugs
-63 1/2 x 6'x 24" deep x 32" tall l-shaped top cabinet with aluminum doors
-stainless top for above bench with 1 radius corner
- 6'x6'x16" deep x 32" tall l-shaped top cabinet with aluminum doors
-install lista tool box front curb side corner with workbench
-above this tool box and closet
-install shiny stainless steel 2'down bottom side of trailer both sides
-add 4' flip bench by arrow that will also mount inside trailer
-add raidus frnt. corners to trailer but use large side bottom extrusion across frnt of trailer
-water system 35 gallons
-standard light package
-fluorescent lights
-50 amp fuse box
-1 shore power outlet
-2 int. switches
-4 int. receptables
-under cabinet lights
-quartz flood lights recessed into side of trailer and mounted in an aluminum box
-air compressor
-prewire for sound system
-4.5lb. winchmounted in center of workbench
-electric tongue jack
-12V battery disconnect switch
-12V batery box
-12V battery charger
-build heavy duty 25' cord
-add back up lights
-upgrade to LED lights on ext. of trailer
Seller Phone Number: 8153785077
This item is USED
Trades NOT ACCEPTED
Payment options:
![]() |
|||
| Cashier's Check | |||
Item Location: ROCKFORD, IL Get Directions To This City
Instructions for buyer: Responsible for shipping
REPORT THE SALE, CLICK HERE
Member's Other Ads
- Member has no other classified ads.

RESOURCE LINKS
- Financing
- Transportation/Shipping
- Purchase Protection
- Insurance






