Price Reduced to 12,000 Thousand got to go bring on the offers.
Above Added: Mon April 7, 2008, 6:42 pm EST
Above Added: Thu April 3, 2008, 1:32 pm EST
One of a kind 1983 Dodge Mirada Roadster, 2x3 mild steel chassis with A arm supspension up front and four link out back,coil overs on all four coners.The engine is RB 446 with.030 L2295 TRW pistons swining on race prep factory rods and crank by Joe Owens Racing Engines in Pearland TX.Milodon pan with dual line swinging pickup,Mallory distributor with Crane internals,MSD 7AL3 ignition box.Flat tappet cam from Cam Motion custom ground to take advantage of the extra flow from the Edelbrock 84cc aluminum heads decked to produce 73cc combustion chambers and approx. 12.5 to compression. Transmission is a Tourque Flite with TCI 8 inch converter, Trans King Transbrake valve body,bolt in sprag,and rollerized governor support,controlled by reverse pattern air shifted Turbo Action shifter. The delay box is from Dedenbear. Rear end is Dana 60 with 4.56 gears.Wheels are weld Pro stars front and back,will fit up to 16x33 rear tires.This car is perfect for super Pro Top ET that runs consistent mid 9 ets at 140 plus MPH.The car weighs2440 LBS with 240 lb. driver it is 75% fiberglass.The only original steel is the rear quarter panels. The car is very consistent and has won tons of money. This dependable ride took my friend the previous owner to the IHRA Bracket finals.Price is $15,000 or trade with money for 06-07 F-350 Dully or Yukon XL.Just try to build one for this price.Serious buyers or trades.You can email me at captball5@aol.com Or contact me at 832-461-8533 or 8532 between 8am or 10pm.Also have open race trailer with race box on front,or 24ft inclosed trailer if you need. this is not included in the $15,000 dollar price.Have lots of pictures email me if serious captball5@aol.com and I will send pictures. Car has got to go to many Irons in the fire.Also Funny car Roll Cage.