*****100%NEW***** *****100%NEW*****

Procomp Motorsport's 3065 BB Chrysler Bare (Pair) Aluminum Cylinder Heads

Chrysler 361, 383 & 400 "B" series blocks, 413, 426 Wedge & 440 "RB" blocks.

356-A Aluminum Alloy Heat treated to T-6 Specifications.
72cc Combustion Chamber, 265cc Intake Runners, 265cc Intake Ports,
Intake Ports are raised .650",
Exhaust Ports are raised .250",
265cc Intake Runners (320cfm @ .600 lift)
78cc Exhaust Runners
Machined to accept high performance large diameter dual valve springs.
Machined for Intake Valves, 2.200+.250 long, Exhaust Valves, 1.810+.100 long,
(stock valves will NOT work)
Advanced port design for greater flow.
Fully CNC machined.
Will accept all factory accessories. Heads are drilled with all OEM accessory bolt holes.
Valve Angle of 15 degree
.600" thick deck can be milled down to 66cc.
Must use 14mm x 3/4" reach gasketed seat Spark Plug.

Heat range will vary by application ranging from Champion N-9Y to N-14Y (or equivalent).

These Heads flow over 320cfm @.600 lift.

DUE TO THE WIDTH OF THE INTAKE RUNNER OFF-SET INTAKE ROCKERS ARE REQUIRED

NOTE: Aftermarket Valley Pan Gasket is required
(Edelbrock #7798 or equivalent.
383 "B" uses Edelbrock #7799 Valley Cover Plate Kit or equivalent).

Seller Phone Number: 954-327-7317

This item is NEW

Trades NOT ACCEPTED

Payment options:

NO PERSONAL CHECKS!

Item Location: FORT LAUDERDALE, FL Get Directions

Instructions for buyer:  Buyer will pay all shipping/handling charges to their final delivery destination.

This ad expired 41 days ago.