Results 1 to 2 of 2

Thread: Help... 1972 Chevelle 350 (W/TH350) oil pan removeal (In car)

  1. #1

    Help... 1972 Chevelle 350 (W/TH350) oil pan removeal (In car)

    I'm trying to remove the oil pan to replace a leaking rear main seal, having trouble.
    I set the crank keyway to the 6 o'clock position, removed the motor mount thru bolts, starter & exhaust manifolds and loosened the 2 transmission mount bolts, then I jacked the motor up (On Harmonic balancer)until the trans hit the firewall, still can't get the pan out! I've done rear main seal jobs before on various GM's (And others) but not this year and model, anyone have an idea before I have to yank the engine?

  2. #2
    Member JUNIOR BUILDER jayvee34's Avatar
    Join Date
    Dec 1969
    Location
    St. Augustine, Fl.
    Posts
    92
    I have had to reach into the rear of the pan and unbolt and drop the oil pump
    and pick-up to get the pan to come out. Usually the oil pump and pick-up is
    what prevents the pan from sliding out.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy