Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Price on titanium valves

  1. #1

    Price on titanium valves

    Looking for some good prices on titanium valves 2.230 by 6.250 long and 1.6 by 6.250 long, there for the 2300 Brodix heads , thanks

  2. #2
    Senior Member RACING JUNKIE
    Join Date
    Dec 2008
    Location
    Sugar Hill, GA
    Posts
    1,365
    Even if you get a "good price", you better be sitting down.
    Dave
    http://www.racingjunk.com/profile/343797
    "All that is necessary for the triump of evil is for good men to do nothing" Edmund Burke

  3. #3
    Senior Member DYNO OPERATOR
    Join Date
    Jan 2004
    Location
    central Illinois
    Posts
    459

    Price

    Call Victory Valves.

  4. #4
    Senior Member SENIOR BUILDER
    Join Date
    Dec 2007
    Location
    Morrison, Colorado
    Posts
    120
    I've priced out valves for my new heads, and I hope your budget isn't made of stainless!! Mine are 2.475 int and 1.800 exhausts, and pricing starts at $110 for a basic valve all the way to about $140 for a coated, top shelf one........Yours should be right in that ballpark as well, most I've seen fall in that range, or pretty close to it.
    Mark Goulette
    Owner/Driver of the Livin' the Dream dragster
    www.livinthedreamracing.com
    Speed kills, but it's better than going slow!!!!

  5. #5
    Senior Member RACING JUNKIE
    Join Date
    Jan 2012
    Posts
    628
    Going fast ain't cheap . .

    Going fast more than once is very expensive . . .

    One of the biggest reasons that most bracket cars are 11 second or slower!

    No disrespect, just fact!

  6. #6
    Senior Member RACING JUNKIE TheRabbit's Avatar
    Join Date
    Jan 2007
    Location
    Augusta, Ga.
    Posts
    2,295

    Re: Price on titanium valves

    Quote Originally Posted by promod45
    Looking for some good prices on titanium valves 2.230 by 6.250 long and 1.6 by 6.250 long, there for the 2300 Brodix heads , thanks

    I have some I'll sell you "half price" lol.




  7. #7
    Senior Member DYNO OPERATOR Swiley383's Avatar
    Join Date
    Apr 2010
    Location
    White Bluff TN
    Posts
    591
    Ouch rabbit that's ugly what else got hurt

  8. #8
    Senior Member RACING JUNKIE TheRabbit's Avatar
    Join Date
    Jan 2007
    Location
    Augusta, Ga.
    Posts
    2,295
    Quote Originally Posted by Swiley383
    Ouch rabbit that's ugly what else got hurt
    Well since you asked I have some pistons for sale at half price too!! lol

  9. #9
    Senior Member DYNO OPERATOR
    Join Date
    Jan 2004
    Location
    central Illinois
    Posts
    459

    Price

    I had 3 different break downs with Manley brand titanium valves.

    Heads and tips came off.

    Put Victory in as replacements and no failures since.

    Brad 4 blown Hemi.

  10. #10
    Senior Member RACING JUNKIE TheRabbit's Avatar
    Join Date
    Jan 2007
    Location
    Augusta, Ga.
    Posts
    2,295

    Re: Price

    Quote Originally Posted by markdunlap
    I had 3 different break downs with Manley brand titanium valves.

    Heads and tips came off.

    Put Victory in as replacements and no failures since.

    Brad 4 blown Hemi.
    I wouldn't put Manley valve in my go cart :wink: Those are Victory valves.

  11. Racing Junk


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy