Results 1 to 4 of 4

Thread: Scorpion Rockers and lifters are junk

  1. #1
    Junior Member SHOW GUEST
    Join Date
    Jan 2007
    Posts
    7

    Scorpion Rockers and lifters are junk

    Had a set of scorpian lifters destroy a new SBF 442 CI motor There was trash in the lifter and it made the lifter sieze in the bore. Ruined the afr 225 head and 2 pistons and hurt the dart iron eagle block My builder bought another set and they had rust on them fresh out of the box. He sent them back and got another set new with rust on them. Scorpion will not stand behind there products and wont take responsibility for anything DONT buy their junk

  2. #2
    seized lifter in bore . 99.99% its the builder fault

  3. #3
    Junior Member SHOW GUEST
    Join Date
    Jan 2007
    Posts
    7
    The motor ran for several Dyno pulls and trips around town

  4. #4
    If it made pulls and trips around town then it was not the lifter. It would have gone out a lot sooner than that. Chances are there was something left in the block from the machine shop or the lifters were not sized properly.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy