Engine issue help!

Thread Tools
 
Old 12-29-2012, 09:17 PM
  #1  
racerx1976
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Dec 1969
Posts: 1
Default Engine issue help!

Just wondering if anyone might have an idea on why my sbc acts like it wants to fall down when I try to stall it up now. The engine is a 355 ci with 58cc chambers, throat cut, bowl ported with 2.02/1.60 valves. 13.54:1 comp. weiand single plane intake, 700 dbl pumper carb.
Cam is .488/.510 in/ex. • 300°/310° Adv. Dur. • 112° Lobe Center • 81° Overlap.
3000 stall conv. With th400 tranny.

Used to have a crane fireball 2 292 duration .480 in/ex cam in it and it ran like a champ with a 750 com carb on it, besides just running a tad rich.
racerx1976 is offline  
Old 01-02-2013, 06:19 PM
  #2  
JimmySmith
Senior Member
MASTER BUILDER
 
Join Date: Jan 2007
Location: Batesville Ms.
Posts: 167
Default Car falls down

MY opinion is convertor is too tight ,don't know anything about your car but I would GUESS at least a 4500 convertor. I also don't like the 112 C/L , I would want 106-104 Later J.Smith 4621 racing
JimmySmith is offline  
Old 03-02-2013, 03:25 PM
  #3  
p68ramair
Junior Member
SHOW GUEST
 
Join Date: Jun 2009
Posts: 3
Default car falls down

i agree the converter is to tight depending on what the car is used for u need about 4500 stall or more
p68ramair is offline  
Old 05-01-2013, 05:42 AM
  #4  
outlaw256
Senior Member
RACING JUNKIE
 
Join Date: Mar 2008
Location: falkville al
Posts: 1,764
Default

going to say stall also. and im wondering about that 400 tranny. anything done to it...
outlaw256 is offline  
Old 05-02-2013, 03:33 AM
  #5  
curtisreed
Senior Member
RACING JUNKIE
 
curtisreed's Avatar
 
Join Date: Feb 2004
Location: KIEFER, OK.
Posts: 1,312
Default

He has probably figured it out by now. It's been 5 months since he posted this.

It's odd that the date of p68ramair's post is the 2nd but it came before outlaw256's post dated the 1st.
curtisreed is offline  
Old 05-31-2023, 09:23 AM
  #6  
annamarks
Member
MASTER JOURNEYMAN
 
Join Date: Jan 2023
Posts: 44
Default

I would GUESS at least a 4500 convertor. I also don't like the 112 C/L , I would want 106-104 Later J.Smith 4621 racing

Last edited by annamarks; 06-02-2023 at 08:42 AM.
annamarks is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -