Results 1 to 6 of 6

Thread: Racing action weekend...

  1. #1
    Senior Member RACING JUNKIE TheYellaBrick's Avatar
    Join Date
    Mar 2008
    Location
    Emmett, Idaho
    Posts
    7,334

    Racing action weekend...

    Pikes Peak, Bonneville Speedweek, Nightfire Nationals in Boise,...what else is happening ?
    TRUTH is HATE
    to those who
    HATE TRUTH

    God Bless our folks in uniform
    "We the People, have your backs"
    http://www.racingjunk.com/profile/279898

  2. #2
    Senior Member RACING JUNKIE
    Join Date
    Nov 2008
    Location
    Niagara Falls, NY
    Posts
    965
    how do they tune for pikes peak..... fat at the bottom and it leans out going up to the top or do they use comp/sensors to read and auto adjust?
    GOOD PARTS AREN'T CHEAP AND CHEAP PARTS ARE NEVER GOOD.........
    http://img.photobucket.com/albums/v2...lastscan-3.jpg

  3. #3
    Senior Member RACING JUNKIE TheYellaBrick's Avatar
    Join Date
    Mar 2008
    Location
    Emmett, Idaho
    Posts
    7,334
    Most are EFI anymore and adjust as they gain altitude. The carb guys, like me, would set up the tune for mid to high mid track.
    TRUTH is HATE
    to those who
    HATE TRUTH

    God Bless our folks in uniform
    "We the People, have your backs"
    http://www.racingjunk.com/profile/279898

  4. #4
    Senior Member RACING JUNKIE
    Join Date
    Nov 2008
    Location
    Niagara Falls, NY
    Posts
    965
    Quote Originally Posted by DrivingMissDD
    Most are EFI anymore and adjust as they gain altitude. The carb guys, like me, would set up the tune for mid to high mid track.
    why couldnt you go 3/4 up and tune your ride for the most performance and power ..... then just run a vent line from the intake riser for the carb to the inside of the car with a ball valve ..... then you can crack it open and lean it out for the lower sections and gradually close it off as you go up?
    GOOD PARTS AREN'T CHEAP AND CHEAP PARTS ARE NEVER GOOD.........
    http://img.photobucket.com/albums/v2...lastscan-3.jpg

  5. #5
    Senior Member RACING JUNKIE TheYellaBrick's Avatar
    Join Date
    Mar 2008
    Location
    Emmett, Idaho
    Posts
    7,334
    :shock: :shock: :shock: :shock: :shock: :shock:
    We'll try that theory on YOUR engine FIRST !
    TRUTH is HATE
    to those who
    HATE TRUTH

    God Bless our folks in uniform
    "We the People, have your backs"
    http://www.racingjunk.com/profile/279898

  6. #6
    Senior Member RACING JUNKIE
    Join Date
    Nov 2008
    Location
    Niagara Falls, NY
    Posts
    965
    Quote Originally Posted by DrivingMissDD
    :shock: :shock: :shock: :shock: :shock: :shock:
    We'll try that theory on YOUR engine FIRST !
    we use it already in our drag car... it helps get the heat up in the engine... each pass... he closes it a little farther.... that alky takes awhile to warm up....lol
    GOOD PARTS AREN'T CHEAP AND CHEAP PARTS ARE NEVER GOOD.........
    http://img.photobucket.com/albums/v2...lastscan-3.jpg


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy