350 Circle Track Engine shaved!
#1
Junior Member
SHOW GUEST
Thread Starter
Join Date: Aug 2006
Posts: 1
350 Circle Track Engine shaved!
I bought a what I thought was a usable 350 for my 68 camaro only to find out the block had been lightened a lot! It appears this thing was shaves everywhere you could possible shave it. Is there any value in a block that has been modified in this way. I can no longer use for a street car as they cut the mounting perches off the sides. Thank you!
#2
Senior Member
RACING JUNKIE
Join Date: Mar 2008
Location: falkville al
Posts: 1,764
does it still have the bosses for the front mounts that you could drill and tap? we did one a few yrs ago. mounted it like they did back in 55.if not you now have a big, heavy paper weight.
#3
Senior Member
MASTER BUILDER
Join Date: Apr 2003
Location: Brookings South Dakota
Posts: 244
Depends on where they lightened the block. Doing this to a stock block is in our opinion a NO NO. Aftermarket blocks, we do it all the time. You can probably sell it to a circle track guy, they are very conscience about weight.