crower solid roller lifters
#1
Junior Member
APPRENTICE
Thread Starter
Join Date: Sep 2003
Location: Wichita, KS
Posts: 19
crower solid roller lifters
Can crower lifters be rebuilt? I've found a couple that the wheel is catching in a couple spots. I'd hate to trash them if i didnt have to. I looked on crower's site but they didnt say anything about being able to rebuild them.
I believe they are P/N 66200
I guess worse case is i just buy two pair.
I believe they are P/N 66200
I guess worse case is i just buy two pair.
#4
Senior Member
DYNO OPERATOR
Join Date: Apr 2008
Posts: 496
THAT hanging spot might be a missing roller bearing or 2,check your oil filter to be safe!I had a set of comp solid roller lifters do that and found 3 bearings in my oil filter and 5 in the oil pan!Called comp and they told me that u r supposed to rebuild them every year, mine were 3 years old.I switched to gs lifters and was told to replace or rebuild after 200-300 runs.