Oval exhaust flange - source needed.
#1
Senior Member
RACING JUNKIE
Thread Starter
Join Date: Dec 2008
Location: Sugar Hill, GA
Posts: 1,365
Oval exhaust flange - source needed.
I can't locate a side flange for my fender exit headers.
RJ has an oval one that's 7-1/8 x 5-7/8 but my exit angle is so sharp I need about 8" on the width.
Anyone know of a source? Thanks.
RJ has an oval one that's 7-1/8 x 5-7/8 but my exit angle is so sharp I need about 8" on the width.
Anyone know of a source? Thanks.
#2
Senior Member
RACING JUNKIE
Join Date: Mar 2009
Location: kingsport tn
Posts: 1,729
#3
Ken, are you talking about a fender/body opening surround ? Or and actual exhaust tubing flange ?
The only flanges on Dr Gas are for the actual oval tubing.
http://drgas.mybisi.com/product/oval-exhaust-flanges
The only flanges on Dr Gas are for the actual oval tubing.
http://drgas.mybisi.com/product/oval-exhaust-flanges
#4
I researched a little deeper and answered my own question. RJ is willing to custom make 'em for ya.;
http://www.yellowbullet.com/forum/sh...d.php?t=394422
OR here;
http://www.rjracecars.com/Exhaust-Fl...-Prodview.html
Scroll to the bottom here;
http://www.rjracecars.com/Headers-Prodlist.html
About half way down here;
http://shop.xtremeoutlaw.com/category.sc?categoryId=120
http://www.yellowbullet.com/forum/sh...d.php?t=394422
OR here;
http://www.rjracecars.com/Exhaust-Fl...-Prodview.html
Scroll to the bottom here;
http://www.rjracecars.com/Headers-Prodlist.html
About half way down here;
http://shop.xtremeoutlaw.com/category.sc?categoryId=120