350hp sbc 1/4 mile help
#1
Senior Member
EXPERT BUILDER
Thread Starter
Join Date: Jul 2009
Location: nekoosa wisconsin
Posts: 308
350hp sbc 1/4 mile help
what do you think would be better for a 1/4 mile time
its a stock bottom end 350 that should make about 340-360 hp
im gonna redline it at 5750-6000 rpm
s gonna be running 29x12.5x15 m/t sportsman
what kind of gear do you guys think i should run
i was leaning towards 4.10 i was just gonna change gears in the existing rear end but i found out it was welded posi so i dont wanna dick with it
i can get a posi 8.5 gm with 3.73 for 350 bucks
what i wanna know is how hard will it leave with 3.73 vs the 4.10's
i would like a good hard launch and for it to be quick off the line
it;s in a 76 camaro with a th350 with b@m mega shifter 2000 stall and a stage 2 shift kit
thanks
its a stock bottom end 350 that should make about 340-360 hp
im gonna redline it at 5750-6000 rpm
s gonna be running 29x12.5x15 m/t sportsman
what kind of gear do you guys think i should run
i was leaning towards 4.10 i was just gonna change gears in the existing rear end but i found out it was welded posi so i dont wanna dick with it
i can get a posi 8.5 gm with 3.73 for 350 bucks
what i wanna know is how hard will it leave with 3.73 vs the 4.10's
i would like a good hard launch and for it to be quick off the line
it;s in a 76 camaro with a th350 with b@m mega shifter 2000 stall and a stage 2 shift kit
thanks
#4
Senior Member
RACING JUNKIE
Join Date: Nov 2008
Location: Niagara Falls, NY
Posts: 965
Originally Posted by mrbigtrucks
ok what kind of stall would you suggest with it still being street able it will be cruzed 15 mile to the nearest town often