hp estimate and estimated 1/4 et
06-22-2011, 06:27 PM
#1
Senior Member
EXPERT BUILDER
Thread Starter
Join Date: Jul 2009
Location: nekoosa wisconsin
Posts: 308
hp estimate and estimated 1/4 et
sbc 350 stock bottom end 10:1 compression with
aluminum angle plug heads
intake Port Volume 210cc
Intake Valve Size 2.02
Exhaust Valve Size 1.60
lunati 60105 cam
Advertised Duration : 284° /292°
Duration @ .050 IN/EX : 241° /249°
Gross Valve lift IN/EX .525''/.546''
LSA and ICL 110/106
RPM Range: 2500-6600
High Rise Aluminum Intake
single palne 2500 -7500 rpm rang
holley 750
Mallory hy fire 6 and Mallory unilight distridutor with msd blaster coil
th350 stage 2 shift kit 2200 stall 4:10 gears and 29x12.50 m/t sportsman pro
aluminum angle plug heads
intake Port Volume 210cc
Intake Valve Size 2.02
Exhaust Valve Size 1.60
lunati 60105 cam
Advertised Duration : 284° /292°
Duration @ .050 IN/EX : 241° /249°
Gross Valve lift IN/EX .525''/.546''
LSA and ICL 110/106
RPM Range: 2500-6600
High Rise Aluminum Intake
single palne 2500 -7500 rpm rang
holley 750
Mallory hy fire 6 and Mallory unilight distridutor with msd blaster coil
th350 stage 2 shift kit 2200 stall 4:10 gears and 29x12.50 m/t sportsman pro
06-23-2011, 09:09 AM
#3
Senior Member
EXPERT BUILDER
Thread Starter
Join Date: Jul 2009
Location: nekoosa wisconsin
Posts: 308
heres the heads there some e bay ones
http://cgi.ebay.com/ebaymotors/SBC-3...Q5fAccessories
heres the intake another ebay
http://cgi.ebay.com/ebaymotors/SBC-S...item5adc1d2b38
http://cgi.ebay.com/ebaymotors/SBC-3...Q5fAccessories
heres the intake another ebay
http://cgi.ebay.com/ebaymotors/SBC-S...item5adc1d2b38
