Results 1 to 3 of 3

Thread: hp estimate and estimated 1/4 et

  1. #1
    Senior Member EXPERT BUILDER
    Join Date
    Jul 2009
    Location
    nekoosa wisconsin
    Posts
    308

    hp estimate and estimated 1/4 et

    sbc 350 stock bottom end 10:1 compression with

    aluminum angle plug heads
    intake Port Volume 210cc
    Intake Valve Size 2.02
    Exhaust Valve Size 1.60

    lunati 60105 cam
    Advertised Duration : 284 /292
    Duration @ .050 IN/EX : 241 /249
    Gross Valve lift IN/EX .525''/.546''
    LSA and ICL 110/106
    RPM Range: 2500-6600

    High Rise Aluminum Intake
    single palne 2500 -7500 rpm rang

    holley 750

    Mallory hy fire 6 and Mallory unilight distridutor with msd blaster coil

    th350 stage 2 shift kit 2200 stall 4:10 gears and 29x12.50 m/t sportsman pro

  2. #2
    Member CRAFTSMAN
    Join Date
    Dec 2010
    Location
    anchorage alaska
    Posts
    56
    The intake runners seem a little large for a 350. What kind of heads and intake.
    This wouldn't have happened if only you had been paying attention!

  3. #3
    Senior Member EXPERT BUILDER
    Join Date
    Jul 2009
    Location
    nekoosa wisconsin
    Posts
    308
    heres the heads there some e bay ones

    http://cgi.ebay.com/ebaymotors/SBC-3...Q5fAccessories

    heres the intake another ebay

    http://cgi.ebay.com/ebaymotors/SBC-S...item5adc1d2b38


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy