Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Problem with seller "creig"

  1. #1
    Junior Member SHOW GUEST
    Join Date
    Oct 2005
    Posts
    8

    Problem with seller "creig"

    Hi,all!
    Has anyone had a problem with seller named "creig"?
    He sold me a set of Racepak EGT's for $520 in the middle of December.
    Although I got EGT's by the beginning of January, there is no way
    (according to Donnie @ Racepak) to make them work with a Racepak.
    Emails and phone calls have been useless. He keeps saying he's sending cables or a box to make the EGT's work with the Racepak, but here it is
    the beginning of March, and all I've got is a $520 doorstop.
    Now he's down to seeing my number on caller ID and not answering the phone.
    I have his address and phone number (Florida) if anyone lives down in that
    area. I'm in AZ, so it's not around the corner for me.
    I've not had any real bad dealings on RJ as a buyer (about 30 buys), but after reading some of the horror stories on this forum, I have to ask....
    Whatever happened to playing "straight-up" anymore ???
    And whose brilliant idea was it to not allow to give feedback to a seller unless the seller makes his honor payment???

  2. #2
    Senior Member RACING JUNKIE mopar1968's Avatar
    Join Date
    Dec 2006
    Location
    Abingdon,Virginia
    Posts
    3,579
    Do you have a add# :?: Something to go by :!: Name no good no profile :!: :!:



    Mark
    Head's up the true drag race!!

  3. #3
    Junior Member SHOW GUEST
    Join Date
    Oct 2005
    Posts
    8

    creig

    Sorry.
    Ad number was 2072984

  4. #4
    Senior Member RACING JUNKIE mopar1968's Avatar
    Join Date
    Dec 2006
    Location
    Abingdon,Virginia
    Posts
    3,579
    I sent a message let's see if he replies :!: :!:



    Mark
    Head's up the true drag race!!

  5. #5
    Junior Member SHOW GUEST
    Join Date
    Oct 2005
    Posts
    8

    EGT's

    Well, Mopar;
    Thanks for getting him off his ass to contact me.

    Problem is, he told me early in Jan he had the cables to make the EGT's work and he would send. Never sent them. Then in late Jan , after more prodding and my talk with Racepak telling me they would not work, he tells
    me he has a box to make the EGT's work and he will send it. Never sent.
    Which brings us to today.
    Since your email, he sent me a message thru RJ that it will now be another $500 to make these work with a Racepak.
    I sent him a reply, that the items are not as listed in the ad and I would like a refund.
    Can I just cut and paste the text of my messages to the forum??
    After looking at the ad, am I out of line or expecting too much?

  6. #6
    Senior Member MASTER BUILDER
    Join Date
    Jun 2006
    Posts
    227

    Re: EGT's

    Quote Originally Posted by combdyn
    Well, Mopar;
    Thanks for getting him off his ass to contact me.

    Problem is, he told me early in Jan he had the cables to make the EGT's work and he would send. Never sent them. Then in late Jan , after more prodding and my talk with Racepak telling me they would not work, he tells
    me he has a box to make the EGT's work and he will send it. Never sent.
    Which brings us to today.
    Since your email, he sent me a message thru RJ that it will now be another $500 to make these work with a Racepak.
    I sent him a reply, that the items are not as listed in the ad and I would like a refund.
    Can I just cut and paste the text of my messages to the forum??
    After looking at the ad, am I out of line or expecting too much?



    Mopar is he Man !!!!!

  7. #7
    Senior Member RACING JUNKIE lively's Avatar
    Join Date
    Nov 2004
    Location
    ILLINOIS
    Posts
    2,191
    WELL -IT does say RACEPAK EGT'S--SOOOOOO
    I THINK the SELLER[CREIG] MISREPRESENTED the items HE[ THE SELLER] had for sale :cry:

    LET'S SEE NOW SELLER--GIVE HIM HIS MONEY BACK OR THE CORRECT PARTS TO MAKE THEM WORK[IF YOU CAN???]
    WAIT A MINUTE--THAT MIGHT BE THE HONEST THING TO DO!!
    honesty--the lost art form ops: ops:


    now-i FEEL BETTER 8) :shock:

  8. #8
    Senior Member RACING JUNKIE mopar1968's Avatar
    Join Date
    Dec 2006
    Location
    Abingdon,Virginia
    Posts
    3,579
    I just sent him another message with a different idea :!: Let's see what happen's now :!:




    Mark
    Head's up the true drag race!!

  9. #9
    Junior Member SHOW GUEST
    Join Date
    Oct 2005
    Posts
    8

    more of "Creig" Craig Kiernan

    Sellers name is Craig Kiernan of Ft. Lauderdale, FL
    His message of today is that I got exactly what he listed.
    Another 3 calls to Racepak, and again seller is lying.
    The $500 box seller says is all I need, Racepak says is $549 per side.
    I'd have over $1600 in EGT's, when new from Bickel or Racepak
    they are $1398.
    Worst part is that since buying these , I have seen others on RJ for sale
    complete for about $800.
    And they must be more honest sellers, since buyers have not posted
    complaints.

  10. #10
    Junior Member SHOW GUEST
    Join Date
    Oct 2005
    Posts
    8
    Difficult to read, but these are the RJ messages from this transaction.
    You can see the dates.

    Anybody in FL on the forum??


    >On [2011-3-2 18:34:55] combdyn wrote:
    you don't think waiting over two months is being patient??

    I just spoke with Racepak again.Whether you are misunderstanding them or lying I do not know.
    THESE EGT's CANNOT BE USED WITH A V300.
    DIFFERING TECHNOLOGY.
    THERE IS NO CURRENT RACEPAK THAT CAN USE THESE EGT's.
    When Todd told you a box,he meant you need TWO NEW BOXES
    at $549 each. I'm not paying over $1600 for EGT's
    You did not list these as antique unusable EGT's
    Step up and refund!

    On [2011-03-02 17:18:00] creig wrote:
    >
    >
    > On [2011-03-01 19:58:24] combdyn wrote:
    > > On 1/10/11 you were sending me a box to make these work.
    > > I have been patient since I bought these, but it has been one story after another from you. You sold these as working Racepak EGT's. Donnie at Racepak says they are not. First you had wires to make them work.Nothing. Then you had a box to make the work. Now it's supposed to be another $500?
    > > No more jerking me around. You need to take these EGT's back and refund the money.They are notas you listed. I'll pay the return shipping,you return the $520.
    > >
    > > On [2011-03-01 19:00:28] creig wrote:
    > First of all, I spoke with Todd at RacePak last week and he said that they WILL adapt to your SV300, however you will need to purchase the ends that will adapt to your SV300. I sold the EGTs to you representing that they were simply Racepak EGTs, however you need to connect them to adapt to your application is a seperate issue. NOTHING WAS MISREPRESENTED IN THE SALE -- they are Racepak EGTs. I represented to you that I will, for no additional cost, send you the Racepak SC1000 computer system that
    > I have no use for, just to help you out. I am just waiting to get it back from my mechanic. This part alone is worth $1,000 so I think I am going over and above what is fair. This is all that I can do for you -- you received EXACTLY what I represented for sale in the ad, so please be patient and I will send you the free parts as soon as I get them.
    >
    > > > On [2011-02-02 14:249:31] combdyn wrote:
    > > > > Hi Craig, it's me again.
    > > > >
    > > > > Still looking to get my EGT's working.
    > > > > I'm not sure if you called Racepak to ask about cabling to
    > > > > the V300, since they told you it was possible.
    > > > > Would it help if I called your buddy to see if I could get the box to you? Right now I've got a real expensive
    > > > > doorstop and no EGT's.
    > > > > Thanks
    > > > >
    > > > > i have had a lot going on i did talk to todd last week at race pack and he told me yes they can be_converted for your egts but is not cheap to do he said each box on the egt ends was about 500$ ___________________________________________
    > > > >
    > > > >
    > > > > On [2011-01-23 01:35:54] creig wrote:
    > > > > >
    > > > > >
    > > > > > On [2011-01-21 11:14:30] combdyn wrote:
    > > > > > > Craig,
    > > > > > > Hi,again!
    > > > > > > Any luck w/ Racepak?
    > > > > > > I have a race next month, and it would be nice to see EGT's my buddy was at a race this week he will be back on mon i will get the unit then..... i havent forgot you...
    > > > > > > > > > > > > On [2011-01-10 20:42:11] creig wrote:
    > > > > > > >
    > > > > > > >
    > > > > > > > On [2011-01-10 14:19:30] combdyn wrote:
    > > > > > > > > Craig,
    > > > > > > > > Finally got to speak with Racepak today.(Donnie)
    > > > > > > > > No Racepak unit can use these boxes. They don't even have a way of converting them.Donnie said there are no cables for them.
    > > > > > > > > im glad they called you back because they wount call me
    > > > > > > > > _they were on a sc 1000 unit i still have the racepak _unit if you want i will send you this peice for free if that will help you ._________________________________________________
    > > > > > > > >
    > > > > > > > > On [2011-01-05 09:45:12] creig wrote:
    > > > > > > > > >
    > > > > > > > > >
    > > > > > > > > > On [2011-01-04 21:31:39] combdyn wrote:
    > > > > > > > > > > I called them at Racepak today and left a message,
    > > > > > > > > > > but I have not received a return call yet.
    > > > > > > > > > > I've been going through Bickel,
    > > > > > > > > > > who said they were not available.
    > > > > > > > > > > I was just hoping you had come across yours.
    > > > > > > > > > >
    > > > > > > > > > > On [2011-01-04 20:39:17] creig wrote:
    > > > > > > > > > > >
    > > > > > > > > > > >
    > > > > > > > > > > > On [2011-01-04 13:00:29] combdyn wrote:
    > > > > > > > > > > > > Craig,
    > > > > > > > > > > > > If it helps, I believe the wires I need have blue ends
    > > > > > > > > > > > > on them and are about a foot long. The screw-on end
    > > > > > > > > > > > > seems to be the problem.Racepak doesn't sell them.
    > > > > > > > > > > > > thanks
    > > > > > > > > > > > > i will call racepak tommrow...
    > > > > > > > > > > > > On [2010-12-27 18:39:55] creig wrote:
    > > > > > > > > > > > > >


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy