434" sbc if I go to afr 245 heads & less comp will
#1
Senior Member
SENIOR BUILDER
Thread Starter
Join Date: Apr 2006
Posts: 103
434" sbc if I go to afr 245 heads & less comp will
i have a 434" SBC with 14.8 to 1 and AFR 227 ported heads (58cc) car & driver 2420#, if i go to AFR 245cc heads (70cc) and .039 head gasket i will be at 13.3 to 1, my car ran [email protected] on a 4ths. pro tree deep staging, what i would like to know will i lose et? thanks for you help Doug
#4
Senior Member
MASTER BUILDER
Join Date: Apr 2003
Location: Brookings South Dakota
Posts: 244
Re: 434" sbc if I go to afr 245 heads & less comp w
Originally Posted by bowler
i have a 434" SBC with 14.8 to 1 and AFR 227 ported heads (58cc) car & driver 2420#, if i go to AFR 245cc heads (70cc) and .039 head gasket i will be at 13.3 to 1, my car ran [email protected] on a 4ths. pro tree deep staging, what i would like to know will i lose et? thanks for you help Doug
#5
Senior Member
SENIOR BUILDER
Thread Starter
Join Date: Apr 2006
Posts: 103
afr 245 heads
yes I have spread port heads with Jesel shaft rockers, I called AFR and they are not ready yet (next month) I might be able to use my rockers but would have to buy offset intake rockers, if it is not to expensive I would like to use them. just did not want to slow down. thanks for your info Doug