Results 1 to 10 of 10

Thread: anyone ever use parts from this company?

  1. #1
    Senior Member RACING JUNKIE
    Join Date
    Nov 2008
    Location
    Niagara Falls, NY
    Posts
    965

    anyone ever use parts from this company?

    well im looking for some fiberglass vega parts and was wondering if anyone had any dealing with this company. quality,shipping,ect
    http://www.up22.com/vega71.htm#V-202

  2. #2
    Senior Member RACING JUNKIE
    Join Date
    Apr 2009
    Location
    kingsport tn
    Posts
    1,735
    ive never heard anything bad about them i personally have no experience
    CRIMEDOG
    Sam Wood

  3. #3
    Senior Member RACING JUNKIE mopar1968's Avatar
    Join Date
    Dec 2006
    Location
    Abingdon,Virginia
    Posts
    3,579
    Yes i have ordered bumpers for a duster 3 years ago, took 6 months to get them i would not order from them again :!: They gave me excuse after excuse :!: :!:









    Mark
    Head's up the true drag race!!

  4. #4
    Senior Member EXPERT BUILDER gearhead1011's Avatar
    Join Date
    Jan 2004
    Location
    Shepherdsville, KY
    Posts
    313
    I used Unlimited stuff on my Pinto and it was the nastiest fiberglass I've ever seen. It took a lot of body work to get it ready for paint. I thought there was a thread on RJ about them but I can't seem to find it right now. There is a thread on another site if you want to check it out here. http://motorsportsvillage.com/forum/...php?f=4&t=7203

    I used Glasstek on my Probe and couldn't be happier. Some light sanding and a little primer and it was ready for paint. Their website shows the Vega stuff. http://glasstek.com/

  5. #5
    Senior Member RACING JUNKIE
    Join Date
    Apr 2009
    Location
    kingsport tn
    Posts
    1,735
    i stand corrected :shock:
    CRIMEDOG
    Sam Wood

  6. #6
    Senior Member RACING JUNKIE
    Join Date
    Nov 2008
    Location
    Niagara Falls, NY
    Posts
    965
    Quote Originally Posted by gearhead1011
    I used Unlimited stuff on my Pinto and it was the nastiest fiberglass I've ever seen. It took a lot of body work to get it ready for paint. I thought there was a thread on RJ about them but I can't seem to find it right now. There is a thread on another site if you want to check it out here. http://motorsportsvillage.com/forum/...php?f=4&t=7203

    I used Glasstek on my Probe and couldn't be happier. Some light sanding and a little primer and it was ready for paint. Their website shows the Vega stuff. http://glasstek.com/
    gearhead, is it drag car quality? i just want it to look descent enough so i can paint my vega one color and look nice.... no show car by any means. what did you have to do to it before you painted it?

  7. #7
    Senior Member RACING JUNKIE mopar1968's Avatar
    Join Date
    Dec 2006
    Location
    Abingdon,Virginia
    Posts
    3,579
    I would say no they aren't any quality dragrace or other wise :!: I would just stay away from them :!:










    Mark
    Head's up the true drag race!!

  8. #8
    Senior Member RACING JUNKIE
    Join Date
    Nov 2008
    Location
    Niagara Falls, NY
    Posts
    965
    Quote Originally Posted by mopar1968
    I would say no they aren't any quality dragrace or other wise :!: I would just stay away from them :!:

    Mark


    thanks mark.... i think i will guess i see now why the front clip is only $520 dollars :wink:

  9. #9
    Senior Member EXPERT BUILDER gearhead1011's Avatar
    Join Date
    Jan 2004
    Location
    Shepherdsville, KY
    Posts
    313
    Quote Originally Posted by fast75vega
    Quote Originally Posted by gearhead1011
    I used Unlimited stuff on my Pinto and it was the nastiest fiberglass I've ever seen. It took a lot of body work to get it ready for paint. I thought there was a thread on RJ about them but I can't seem to find it right now. There is a thread on another site if you want to check it out here. http://motorsportsvillage.com/forum/...php?f=4&t=7203

    I used Glasstek on my Probe and couldn't be happier. Some light sanding and a little primer and it was ready for paint. Their website shows the Vega stuff. http://glasstek.com/
    gearhead, is it drag car quality? i just want it to look descent enough so i can paint my vega one color and look nice.... no show car by any means. what did you have to do to it before you painted it?
    The unlimited is not drag car quality, maybe primered, demo-derby quality. The stuff I had took at least a gallon of body filler for the doors and front fenders. The stuff wouldn't stay straight either, it seemed to get wavy after being out in the sun. A few months ago a body guy told me that the cheap resin used in fiberglass will cause that but the more expensive epoxy won't. My Glasstek stuff still looks great after 5 years of racing.

  10. #10
    Senior Member EXPERT BUILDER
    Join Date
    May 2004
    Posts
    298
    Do yourself a favor and do a Google search on them.....Ouch!


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy