Results 1 to 6 of 6

Thread: injection ( position of nozzels in runner )( with nitrous )

  1. #1

    injection ( position of nozzels in runner )( with nitrous )

    i have a enderlie injection with a bird catcher on a edelbrock intake on al
    1- the nozzels & lines are at the bottom of runner ,but i am going to install a fogger and i am curious to know where is the best place to have the injection nozzels at the bottom of runners or towards the top ans keep nos nozzela at bottom ,, any info will be trult appreciated ,, thanks larry

  2. #2

    info needed ?????????

    i didnt check the spelling .. but i didnt type that very good ,, so ill try it again .. i have a enderlie injected motor that i am going to put nos on
    and id like to know if it is better to have the alcohol nozzels at the bottom
    and the nos nozzels above or move the alcohol nozzels up the runners and put nos nozzels at bottom of runner ,,

  3. #3
    Senior Member RACING JUNKIE fla1976's Avatar
    Join Date
    Aug 2007
    Posts
    1,527
    It seems to me that you might have a problem due to the cooling effect of alcohol combined with the cooling effect of nitrous. On gas, I'd say put the nitrous above the gas. I am sure someone with some injection experience will give some better advice. Maybe Zipper will chime in. He's experienced with injection systems.

  4. #4
    Senior Member DYNO OPERATOR
    Join Date
    Aug 2007
    Location
    Lost Creek, WV
    Posts
    533
    We have a Top Dragster running a Rons Terminator on alcohol along with a NOS Fogger systen. The fuel port nozzles are 1 inch up the runner from the flange. And from there 1 inch to the NOS nozzles.

    TS1955

  5. #5
    thanks for the info !!!!!

  6. #6
    Senior Member RACING JUNKIE
    Join Date
    Jan 2006
    Location
    La.
    Posts
    2,890
    Quote Originally Posted by TS1955
    We have a Top Dragster running a Rons Terminator on alcohol along with a NOS Fogger systen. The fuel port nozzles are 1 inch up the runner from the flange. And from there 1 inch to the NOS nozzles.

    TS1955
    X2

    Zip.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy