what type of transfer case does my silverado 1500 have in it
12-18-2010, 07:44 AM
Junior Member
SHOW GUEST
Thread Starter
Join Date: Mar 2008
Posts: 6
what type of transfer case does my silverado 1500 have in it
its a 2000
12-18-2010, 07:52 AM
Senior Member
DYNO OPERATOR
Join Date: Aug 2005
Location: Rifle Colorado
Posts: 585
Several possibilities. Most likely a NewProcess/Venture. There should be a round metal disc bolted to the back of it with all the info.....
Johnny
12-18-2010, 08:21 AM
Junior Member
SHOW GUEST
Thread Starter
Join Date: Mar 2008
Posts: 6
there is no tag onn it so im wondern which one it is
12-18-2010, 08:27 AM
Senior Member
DYNO OPERATOR
Join Date: Aug 2005
Location: Rifle Colorado
Posts: 585
12-18-2010, 08:57 AM
Junior Member
SHOW GUEST
Thread Starter
Join Date: Mar 2008
Posts: 6
12-18-2010, 09:53 AM
Senior Member
DYNO OPERATOR
Join Date: Aug 2005
Location: Rifle Colorado
Posts: 585
Should be a NVG-246....
Johnny
12-18-2010, 10:34 AM
Junior Member
SHOW GUEST
Thread Starter
Join Date: Mar 2008
Posts: 6
ok i have one out of a 2003 1500 but the wireing isnt the same is there anyway i can make it work?
12-18-2010, 11:04 AM
Senior Member
DYNO OPERATOR
Join Date: Aug 2005
Location: Rifle Colorado
Posts: 585
What's different? The connectors or ? If memory serves, the only connectors are the encoder (shift motor), a switch on top that locks in the front axle, a syncro clutch connector at the rear, and a front & rear speed sensor. Could you swap those components to the newer t/c and plug in your existing wiring? I think they all unbolt or screw out except for the syncro clutch. You might have to change the connector on that.
Hope this helps,
Johnny
12-18-2010, 11:45 AM
Junior Member
SHOW GUEST
Thread Starter
Join Date: Mar 2008
Posts: 6
the one out of the 2000 has like 5 plugs on it i think and the 2003 only has three
12-18-2010, 04:53 PM
Junior Member
SHOW GUEST
Thread Starter
Join Date: Mar 2008
Posts: 6
does any one knows what all year transfercases will fit my 2000 chevy 1500? thanks