Results 1 to 5 of 5

Thread: Any LT1 gurus out there??

  1. #1

    Any LT1 gurus out there??

    I have a bone stock LT1 engine with a 94 Painless harness and 94 GM computer, speed density. No MAF.

    I been looking around trying to figure out the direction I would like to go with it,but it seems the majority of mods are for genI motors, or the LS motors.

    Anyone know some proven packages for these motors? I was researching the Edlebrock head,cam and intake packages, but the gains did not look worth the money.

    Keep in mind, my engine is swapped into a Mercury Comet, and the only things done are free flowing exhaust and an air intake elbow.

  2. #2
    You want to be looking at 94 to 96 impala ss that have that engine stock. There should be packages for them.

  3. #3

    LT1

    http://elliottsportworks.com/?page_id=53
    This guy can make big power with his head cam package.

  4. #4
    Senior Member MASTER BUILDER TheEngineer's Avatar
    Join Date
    Sep 2007
    Location
    Moore Oklahoma
    Posts
    129
    /\ /\ Lloyd Elliott does really great LTX head work and is a close friend of mine!


    Also, go to this web site to learn about the national LTX community;

    http://ltxtech.com/forums/

  5. #5
    Junior Member SHOW GUEST
    Join Date
    Mar 2014
    Posts
    2

    LT1 (Gen II V8) upgrades

    Keep in mind that it doesn't take a lot of upgrades on a 1992-1997 LT1 (or any other Gen II engine) for it to be similar in cost to a LSx based engine of similar or more power. Far fewer Gen II engines were made and far fewer products exist for them. Just keep that in mind - I have seen people spend a lot on those engines only to realize that by the end they could have bought an entire Gen III or IV engine for less.

    If you stick to small upgrades (camshaft etc), you can make incremental gains. Above that the $/hp ratio falls off fast.

    Quote Originally Posted by Incognegro View Post
    I have a bone stock LT1 engine with a 94 Painless harness and 94 GM computer, speed density. No MAF.

    I been looking around trying to figure out the direction I would like to go with it,but it seems the majority of mods are for genI motors, or the LS motors.

    Anyone know some proven packages for these motors? I was researching the Edlebrock head,cam and intake packages, but the gains did not look worth the money.

    Keep in mind, my engine is swapped into a Mercury Comet, and the only things done are free flowing exhaust and an air intake elbow.

  6. Racing Junk


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy