Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Engine Blocks

  1. #1

    Engine Blocks

    Any input on the PRO-RACE copy of the Lil M blocks, need to upgrade my bow-tie. C.A.M. Performance is selling these.Thanks :? :?

  2. #2
    Senior Member EXPERT BUILDER
    Join Date
    Nov 2003
    Location
    NORTHEAST
    Posts
    290

    Re: Engine Blocks

    Quote Originally Posted by showbusiness
    Any input on the PRO-RACE copy of the Lil M blocks, need to upgrade my bow-tie. C.A.M. Performance is selling these.Thanks :? :?
    Those are chinese blocks and are junk I have one here and you can have itfor free but I can tell you this its totaly junk.

    I did alot of testing on those junk blocks when they first hit the market a while back.

    Here are some links to go over

    http://speedtalk.com/forum/viewtopic...er=asc&start=0

    This is the link of the final probing and testing of the chinese block and it took couple of months for PBM to admit there blocks were from china, Just an up date PBM no longer sells those blocks.

    http://speedtalk.com/forum/viewtopic...er=asc&start=0
    WWW.CNCBLOCKSNE.COM
    IS A DIVISION OF
    HINKSON AUTOMOTIVE
    RESEARCH & DEVELOPMENT

    CARL HINKSON 207-892-7215
    EMAIL CHINKSON@JUNO.COM

  3. #3

    Engine Blocks

    Thanks for info.

  4. #4
    Senior Member EXPERT BUILDER
    Join Date
    Nov 2003
    Location
    NORTHEAST
    Posts
    290

    Re: Engine Blocks

    Quote Originally Posted by showbusiness
    Thanks for info.
    YOU MEAN YOU DON'T WANT THE FREE CHINESE BLOCK??? :lol:
    WWW.CNCBLOCKSNE.COM
    IS A DIVISION OF
    HINKSON AUTOMOTIVE
    RESEARCH & DEVELOPMENT

    CARL HINKSON 207-892-7215
    EMAIL CHINKSON@JUNO.COM

  5. #5
    Senior Member RACING JUNKIE curtisreed's Avatar
    Join Date
    Feb 2004
    Location
    KIEFER, OK.
    Posts
    1,309
    He has a race car so he probably can't afford a boat. No need for an anchor.

    Curtis

  6. #6
    Senior Member EXPERT BUILDER
    Join Date
    Nov 2003
    Location
    NORTHEAST
    Posts
    290
    Quote Originally Posted by doorracer
    He has a race car so he probably can't afford a boat. No need for an anchor.

    Curtis
    LOL
    WWW.CNCBLOCKSNE.COM
    IS A DIVISION OF
    HINKSON AUTOMOTIVE
    RESEARCH & DEVELOPMENT

    CARL HINKSON 207-892-7215
    EMAIL CHINKSON@JUNO.COM

  7. #7
    Senior Member MASTER BUILDER
    Join Date
    Apr 2003
    Location
    Brookings South Dakota
    Posts
    244
    It's bad enough we have to deal with Chinese Crankshafts, Connecting Rods and rocker arms, but now blocks. We bought one to see what all the hipe was, they are crude.. Dart or world, don't trust anything but these blocks.
    Competition Engines & Hardcore Engine Parts
    www.cnc-motorsports.com
    info@cnc-motorsports.com

  8. #8
    Senior Member RACING JUNKIE
    Join Date
    May 2006
    Posts
    2,044
    Quote Originally Posted by cncmotorsports
    It's bad enough we have to deal with Chinese Crankshafts, Connecting Rods and rocker arms, but now blocks. We bought one to see what all the hipe was, they are crude.. Dart or world, don't trust anything but these blocks.
    IMO it's just a matter of time before world, dart and some of the other brands start buying casting from china.....Cp
    ***IN GOD WE TRUST***

  9. #9
    Senior Member DYNO OPERATOR
    Join Date
    Apr 2008
    Posts
    496
    Quote Originally Posted by cepx111
    Quote Originally Posted by cncmotorsports
    It's bad enough we have to deal with Chinese Crankshafts, Connecting Rods and rocker arms, but now blocks. We bought one to see what all the hipe was, they are crude.. Dart or world, don't trust anything but these blocks.
    IMO it's just a matter of time before world, dart and some of the other brands start buying casting from china.....Cp
    I SURE HOPE NOT BUT MONEY TALKS AND THATS EVENTULLY WANT MATTERS MOST TO SOME!

  10. #10
    Senior Member EXPERT BUILDER
    Join Date
    Nov 2003
    Location
    NORTHEAST
    Posts
    290
    Quote Originally Posted by cepx111
    Quote Originally Posted by cncmotorsports
    It's bad enough we have to deal with Chinese Crankshafts, Connecting Rods and rocker arms, but now blocks. We bought one to see what all the hipe was, they are crude.. Dart or world, don't trust anything but these blocks.
    IMO it's just a matter of time before world, dart and some of the other brands start buying casting from china.....Cp
    I have talk to Richard Maskins quite a few times I really don't think Dart is going to ever go to the chinese for castings.

    Now World I wouldn't be surprised if they did as they seem to bee in trouble financialy and shut there engine building shop down last year because of failur rates were to high,

    We we seeing alot of issues with world blocks and they would never take them back so we stopped using world blocks.
    WWW.CNCBLOCKSNE.COM
    IS A DIVISION OF
    HINKSON AUTOMOTIVE
    RESEARCH & DEVELOPMENT

    CARL HINKSON 207-892-7215
    EMAIL CHINKSON@JUNO.COM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy