How to clean aluminum Intake and valve covers?

Old 08-23-2010, 04:02 PM
  #1  
wvhippie
Senior Member
MASTER BUILDER
Thread Starter
 
Join Date: Oct 2006
Location: West by God Virginia
Posts: 158
Default How to clean aluminum Intake and valve covers?

I just got a car that has set for some time and the Intake and valve covers look bad. What product or products will make them look good?
wvhippie is offline  
Old 08-23-2010, 04:50 PM
  #2  
mopar1968
Senior Member
RACING JUNKIE
 
mopar1968's Avatar
 
Join Date: Dec 2006
Location: Abingdon,Virginia
Posts: 3,578
Default

I have always wondered this also.
mopar1968 is offline  
Old 08-23-2010, 05:18 PM
  #3  
ccperf721p
Senior Member
SENIOR BUILDER
 
Join Date: Nov 2008
Location: Phoenix AZ
Posts: 116
Default

I never had any luck with any type of cleaner, I just pull them and have them sandblasted with coarse sand.

Glassbeading always seem to leave a dull shine where coarse sand would bring it back to the out of the box appearance.

Of course I just got my valve covers back from the blaster and the first person to come over had to say "those look nice and" put his hands on a cover, leaving a nice shadow that even carb spray can't remove.
ccperf721p is offline  
Old 08-23-2010, 06:33 PM
  #4  
itsabird
Senior Member
RACING JUNKIE
 
Join Date: Dec 2007
Location: ohio
Posts: 816
Default

yep sand or bead blasting, would be best, anything with caustic, or acid will only make them uglyer.
itsabird is offline  
Old 08-23-2010, 06:34 PM
  #5  
wvhippie
Senior Member
MASTER BUILDER
Thread Starter
 
Join Date: Oct 2006
Location: West by God Virginia
Posts: 158
Default

Thanks for the info.
wvhippie is offline  
Old 08-31-2010, 06:29 AM
  #6  
Scorpion1110
Senior Member
RACING JUNKIE
 
Join Date: Jun 2007
Location: Standing right behind you
Posts: 1,151
Default

Depends on the finish you want. If its a vintage patina'd look, or traditional factory look, then I would agree with sandblasting; however I wouldnt suggest coarse sand or glass beads. They will clean the aluminum and also "de-skin" it, giving a rough finish. Most valvecovers and intakes retain a smooth light gloss finish. Use walnut shells, TIP aka Truman's sells them.

I have my cabinet set up with walnut shells as I do a lot of Muncie 4-speeds and they are really dirty. The walnut shells remove all the crud and lets them look exactly as new.

If you use glass beads or sand, you might want to at least give it an oil rub or a light steel wool run to get some of the natural look back if you are doing a period look.

However, if you like the rougher look then glass beads work well.
Scorpion1110 is offline  
Old 08-31-2010, 06:15 PM
  #7  
bigray
Senior Member
DYNO OPERATOR
 
Join Date: Jul 2003
Location: Chelsea Oklahoma
Posts: 556
Default

at wal-mart they had some stuff called FOAMING engine brite, and man did it work { WOW } but now all i can find is the straight engine brite, and it does not work neer as well. so if you can find the FOAMY kind it works great,,
bigray is offline  
Old 09-01-2010, 06:53 PM
  #8  
wvhippie
Senior Member
MASTER BUILDER
Thread Starter
 
Join Date: Oct 2006
Location: West by God Virginia
Posts: 158
Default

Thanks Guys.
wvhippie is offline  
Old 09-01-2010, 08:12 PM
  #9  
MEMRACING62
Senior Member
RACING JUNKIE
 
Join Date: Sep 2007
Location: orland pk il
Posts: 2,399
Default

Ive used baking soda on a lot of things I dont want tore up.....anybody try it on aluminum?
MEMRACING62 is offline  
Old 09-07-2010, 09:37 AM
  #10  
JBRI
Junior Member
SHOW GUEST
 
Join Date: Jan 2010
Location: Garden City KS
Posts: 4
Default

i would take it to your local machine shop, there they will have the know how to get exactly what you want
JBRI is offline  

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -