Holley 4150 Rebuild Question

Old 06-26-2010, 12:38 PM
  #1  
yost51
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Nov 2007
Posts: 2
Default Holley 4150 Rebuild Question

I'm working on a 600 Holley and its my first time going through a rebuild. Everything seemed to go smoothly except for the leftover part that I have. I can't remember where I removed these pieces from and I've went through the carb several times trying to find it. The picture is below. Does anyone have any idea where this goes? Thanks in advance for the help.

yost51 is offline  
Old 06-26-2010, 12:51 PM
  #2  
fla1976
Senior Member
RACING JUNKIE
 
fla1976's Avatar
 
Join Date: Aug 2007
Posts: 1,523
Default

Can't really tell too much from the photo, eyes are not as good as they once were. Here is a site that may help though. Increase the resolution to around 250 for a better view.

http://www.holley.com/data/TechServi...ded%20View.pdf
fla1976 is offline  
Old 06-27-2010, 07:44 AM
  #3  
JimmySmith
Senior Member
MASTER BUILDER
 
Join Date: Jan 2007
Location: Batesville Ms.
Posts: 167
Default carb parts

Can't see it very good but on left looks like acc linkage connector, middle goes in metering block and takes the gasket that is rounded and on right don't know. Later J.Smith 4621 racing
JimmySmith is offline  
Old 06-29-2010, 08:01 PM
  #4  
yost51
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Nov 2007
Posts: 2
Default

From my recollection it all came out together from the same spot. I apologize for the blurry picture. The camera I'm using isn't very good. From left to right there is a check ball, a spring, a nipple type item with no hole, and a plug type item with slots for air or fuel (not sure).
yost51 is offline  
Old 06-29-2010, 09:26 PM
  #5  
cam67152
Senior Member
MASTER BUILDER
 
Join Date: Apr 2009
Location: B.C. Canada
Posts: 145
Default

The ball could come from acouple of places depending on the model....
1.primary fuel bowl, under the accelerator pump.
2.under the pump discharge nozzel.
3.the vaccum canister if it is a vac secondary

I would guess the ball came out of option 1. but just a guess from what I can make out. as for the other parts :?: :?:
cam67152 is offline  
Old 06-30-2010, 05:39 PM
  #6  
JimmySmith
Senior Member
MASTER BUILDER
 
Join Date: Jan 2007
Location: Batesville Ms.
Posts: 167
Default

With the last description I would withdraw my guess cause it ain't right sorry J.Smith 4621 racing :?
JimmySmith is offline  
Old 06-30-2010, 09:40 PM
  #7  
cepx111
Senior Member
RACING JUNKIE
 
Join Date: May 2006
Posts: 2,044
Default

I'm gonna go with option #2

Hey Jimmy, check your pm's

Cp
cepx111 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -