Results 1 to 7 of 7

Thread: Holley 4150 Rebuild Question

  1. #1
    Junior Member SHOW GUEST
    Join Date
    Nov 2007
    Posts
    2

    Holley 4150 Rebuild Question

    I'm working on a 600 Holley and its my first time going through a rebuild. Everything seemed to go smoothly except for the leftover part that I have. I can't remember where I removed these pieces from and I've went through the carb several times trying to find it. The picture is below. Does anyone have any idea where this goes? Thanks in advance for the help.


  2. #2
    Senior Member RACING JUNKIE fla1976's Avatar
    Join Date
    Aug 2007
    Posts
    1,527
    Can't really tell too much from the photo, eyes are not as good as they once were. Here is a site that may help though. Increase the resolution to around 250 for a better view.

    http://www.holley.com/data/TechServi...ded%20View.pdf

  3. #3
    Senior Member MASTER BUILDER
    Join Date
    Jan 2007
    Location
    Batesville Ms.
    Posts
    167

    carb parts

    Can't see it very good but on left looks like acc linkage connector, middle goes in metering block and takes the gasket that is rounded and on right don't know. Later J.Smith 4621 racing

  4. #4
    Junior Member SHOW GUEST
    Join Date
    Nov 2007
    Posts
    2
    From my recollection it all came out together from the same spot. I apologize for the blurry picture. The camera I'm using isn't very good. From left to right there is a check ball, a spring, a nipple type item with no hole, and a plug type item with slots for air or fuel (not sure).

  5. #5
    Senior Member MASTER BUILDER
    Join Date
    Apr 2009
    Location
    B.C. Canada
    Posts
    145
    The ball could come from acouple of places depending on the model....
    1.primary fuel bowl, under the accelerator pump.
    2.under the pump discharge nozzel.
    3.the vaccum canister if it is a vac secondary

    I would guess the ball came out of option 1. but just a guess from what I can make out. as for the other parts :?: :?:

  6. #6
    Senior Member MASTER BUILDER
    Join Date
    Jan 2007
    Location
    Batesville Ms.
    Posts
    167
    With the last description I would withdraw my guess cause it ain't right sorry J.Smith 4621 racing :?

  7. #7
    Senior Member RACING JUNKIE
    Join Date
    May 2006
    Posts
    2,044
    I'm gonna go with option #2

    Hey Jimmy, check your pm's

    Cp
    ***IN GOD WE TRUST***


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy