Results 1 to 5 of 5

Thread: how to wire msd crank trigger

  1. #1

    how to wire msd crank trigger

    i have a used crank trigger for a sbc.and iam running a mallory unlite dist. and a 6al box. how do you install and set up crank trigger,wiring,phasing the rotor,ect?and do you have to lock out the timing

  2. #2
    Senior Member RACING JUNKIE curtisreed's Avatar
    Join Date
    Feb 2004
    Location
    KIEFER, OK.
    Posts
    1,309
    See it this is what you need.

    http://www.msdignition.com/instructi...=crank+trigger

    Curtis

  3. #3
    that is what i need. thanks for the help

  4. #4
    Senior Member RACING JUNKIE TheRabbit's Avatar
    Join Date
    Jan 2007
    Location
    Augusta, Ga.
    Posts
    2,295
    One thing to remember is that on a distributor the wires from your ign. box that plugs into the dis. are swapped. ( Green to Violet). On a crank trigger they match ( Green to Green, Violet to Voilet). The crank trigger should have a plug so it shouldn't be a problem.

  5. #5
    Senior Member RACING JUNKIE
    Join Date
    May 2003
    Location
    Coldwater, MI
    Posts
    2,998
    Quote Originally Posted by TheRabbit
    One thing to remember is that on a distributor the wires from your ign. box that plugs into the dis. are swapped. ( Green to Violet). On a crank trigger they match ( Green to Green, Violet to Voilet). The crank trigger should have a plug so it shouldn't be a problem.
    hmmm mine arent swapped ??! Dist is same as the crank trigger


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy