Carb Jets when using Nitrous
#1
Senior Member
MASTER BUILDER
Thread Starter
Join Date: Aug 2007
Location: Iowa - USA
Posts: 218
Carb Jets when using Nitrous
I'm going to add a 250 shot of nitrous to a sbc. As of the the jetting appears to be correct. When I install the nitrous, do I need to increase the jet size?
#3
Senior Member
DYNO OPERATOR
Join Date: Aug 2007
Location: Lost Creek, WV
Posts: 533
Originally Posted by jmarksdragster
Jet the nitrous system for the fuel you need on when the switch is on, if you jet the carb it will be incorrect when not using it.
TS1955