Results 1 to 1 of 1

Thread: poor idle

  1. #1
    Senior Member MASTER BUILDER
    Join Date
    Apr 2009
    Location
    B.C. Canada
    Posts
    145

    poor idle

    A friend of mine just received his new motor 440 mopar edelbrock performer heads, 11:1 comp, not sure on cam specs but I no its the largest solid flat tappet that mopar performance makes, single plane intake with a 1050 dominator.
    The problem is we cant seem to get a decent idle, seems like a lean backfire but burn your eyes out its so rich.
    It clears up nice after mid range right up to max rpm.
    on the way back down it takes a long time to get to idle, then stumbles and stalls, if you try to give it throttle it backfires!

    we changed to a 850 with a little improvement but not much!
    it also takes along time to get to temp.

    I'm thinking cam timing? or vacuum leak?

    Thanks Kirk

    I KNOW............ ITS A MOPAR :? :roll: :? :roll: :? :roll: :?

  2. Racing Junk


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy