unclogging oil passage from filter to sending unit on sbc
02-21-2010, 07:08 AM
Junior Member
SHOW GUEST
Thread Starter
Join Date: Jan 2010
Posts: 2
unclogging oil passage from filter to sending unit on sbc
The oil passage from the filter to the top of the motor is clogged pretty tight. Took adapter off and the wooly type seal was gone and i think it got pushed in the passage. need suggestions on how to get it out.
thanks
02-21-2010, 08:24 AM
Senior Member
RACING JUNKIE
Join Date: Mar 2009
Location: kingsport tn
Posts: 1,729
please do not make 2 threads on same topic when some one has a viable option they will post thanks
02-21-2010, 08:59 AM
Senior Member
RACING JUNKIE
Join Date: Dec 2006
Location: Abingdon,Virginia
Posts: 3,578
Try compressed air first, shoot down from sending unit first :!: :!:
''JUST MY TWO CENT'S WORTH''
02-23-2010, 01:52 AM
Senior Member
EXPERT BUILDER
Join Date: Oct 2007
Location: Staunton,VA.
Posts: 254
plug it off and move to the side of the block just above the filter take out the plug and put youre sending unit (gauge line there)there.
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off