Hardtail to 4 link
#1
Junior Member
SHOW GUEST
Thread Starter
Join Date: Nov 2009
Posts: 5
Hardtail to 4 link
Would it be a major project to convert a hard tail to a 4 link. I have been looking at altereds. I want a 4 link but most out there are hardtails. would it ruin the design of the chassis
#2
Member
CRAFTSMAN
Join Date: Jul 2007
Location: Orlando
Posts: 58
How about the front end? Suspended? If not, you certainly don't want to go to a 4link. Consider the benefits of an ARB when added to a fully suspended car. The ARB acts to increase the rear roll stiffness relative to the front roll stiffness. This results in more of the reaction to the driveshaft torque being fed back to help equalize the rear tire loading.
So, instead of a 4link at the rear, you might be far better off to go to a softly sprung front end.
http://www.racetec.cc/shope
So, instead of a 4link at the rear, you might be far better off to go to a softly sprung front end.
http://www.racetec.cc/shope