Page 1 of 4 123 ... LastLast
Results 1 to 10 of 36

Thread: modracer11s is a crook do not buy from him

  1. #1

    modracer11s is a crook do not buy from him

    modracer11s is a crook and i would advise everyone to refrain from buying anything or trading anything from him.i traded him a rolling chassis late model car for a clip car that he had represented as a race ready car the starter was bad on the car so we took his word for it and he guranteed the engine to be a built 383 and for it to run perfect.i got it home put a starter on it and started it up and it had a dead cylinder i removed the valve covers ans it had factory stamped gm rockers.i have contacted him many times trying to get him to make it right and he said thats its my problem so im getting on here and letting everyone know if you buy anything off of this guy it is junk he will lie right to your face and scam you just to get what you got so buyer beware i would like to report him to racing junk but i dont know how so i am posting this tread to warn people that he is a crook

  2. #2
    Senior Member RACING JUNKIE
    Join Date
    Dec 2008
    Location
    Sugar Hill, GA
    Posts
    1,365
    OK wild. Ad number please......
    Dave
    Dave
    http://www.racingjunk.com/profile/343797
    "All that is necessary for the triump of evil is for good men to do nothing" Edmund Burke

  3. #3

    ad#

    it is 1711350 he misrepresented this car all the way around

  4. #4
    Senior Member RACING JUNKIE BEAST477's Avatar
    Join Date
    Feb 2007
    Location
    Michigan
    Posts
    1,908
    I'm sorry you feel like you got took. His ad states the engine is all GM. Says nothing about roller anything or name brand parts, the rear end is shot, the starter is junk, and the carb needs gone through. Sounds to me like it was rode hard and put away wet. How many RED flags do you need to be hit with :!: :roll:
    BEAST477






    Only a rich man can afford to use cheap parts.

    http://www.racingjunk.com/profile/177549

  5. #5
    Senior Member RACING JUNKIE
    Join Date
    Mar 2006
    Location
    EUGENE,OR.
    Posts
    3,408
    Amen, I have to agree w/ El'SuperBeast-o on this one.
    "I would walk through hell on Sunday before I fear the enemy"

  6. #6
    Moderator RACING JUNKIE Harbone's Avatar
    Join Date
    Aug 2007
    Posts
    3,919
    Blog Entries
    1
    I personally would have said no way, why would you trade for anthing you can not hear run?? Also, if you were taking the guys word for it, you should have at least pulled a valve cover off! Sorry, I am thinking the buyer is just as responsible as the seller on this one. Thats just my opinion...
    Chris

    As close to "Normal" as I can get...

  7. #7

    crook

    the ad also said it was a 383 he said it had a 750 holly carburator and he said it had a half of season on the engine.i understand it wasnt the brightest idea but i trusted the guy.yes it does say its a gm motor but it is not a 383 this engine in this car is bone stock the bore the stroke everything is stock except the valve covers he put a set of tall valve covers on it to make it appear to be a roller engine he even tells me that its a roller engine and he said it ran perfect and when i put a starter on it it was missing and smoking like a tar kil thats just plain out right dirty dealing and he knows it

  8. #8
    Senior Member RACING JUNKIE mopar1968's Avatar
    Join Date
    Dec 2006
    Location
    Abingdon,Virginia
    Posts
    3,579
    Sorry to say but i have to agree with the Beastmaster on this, I would have ran not even replied to the ad :!: :!:



    ''JUST MY TWO CENT'S WORTH''
    Head's up the true drag race!!

  9. #9
    Senior Member RACING JUNKIE BEAST477's Avatar
    Join Date
    Feb 2007
    Location
    Michigan
    Posts
    1,908
    Are you saying now it doesn't even have a Holley carb? Did you even take the air cleaner off to look? He tells you it's a roller motor and you don't take out four bolts to remove a valve cover to check that either? Lets see if we can get the guy on here and see what he has to say.
    Either way I hope you learned something from this. Trust noone and believe only half of what you see.
    BEAST477






    Only a rich man can afford to use cheap parts.

    http://www.racingjunk.com/profile/177549

  10. #10
    Senior Member RACING JUNKIE
    Join Date
    Mar 2006
    Location
    EUGENE,OR.
    Posts
    3,408
    Quote Originally Posted by BEAST477
    Are you saying now it doesn't even have a Holley carb? Did you even take the air cleaner off to look? He tells you it's a roller motor and you don't take out four bolts to remove a valve cover to check that either? Lets see if we can get the guy on here and see what he has to say.
    Either way I hope you learned something from this. Trust noone and believe only half of what you see.
    Words to live by... no doubt.
    "I would walk through hell on Sunday before I fear the enemy"


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy