Results 1 to 4 of 4

Thread: Another Mopar engine question

  1. #1

    Another Mopar engine question

    On this 440 unfired engine I purchased, I have a question on the top end oiling. It is a 76 block and I wonder if it oils thru the rocker shaft or the pushrods. The reason I ask is that the lifters have a hole in the top as if they pump thru the pushrods. And the rockers have a squirt hole as if the pushrods lube them. The problem is , the pushrods are solid and could not lube anything. I noticed the Comp catalogue lists two different numbers for the lifters and I have another 440 that doesn't have holes in the lifters either on the side or top. I just don't want to crank this thing with mismatched parts and not be oiling the top end. Any clarification would be appreciated.

  2. #2

    rockers

    the mopar oils thrue the block and then the head then to the rocker shaft, so the pushrods should be solid

  3. #3
    Senior Member RACING JUNKIE mopar1968's Avatar
    Join Date
    Dec 2006
    Location
    Abingdon,Virginia
    Posts
    3,579
    Promod is correct :!: :!:



    ''JUST MY TWO CENT'S WORTH''
    Head's up the true drag race!!

  4. #4
    Thanks guys, appreciate the help.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy