I have a 88 chevy s-10 with a th350 a 350 engine and a 8.75 rear end since i have put the rear end in i have busted the bellhousing off 2 tranys and busted the bellhousing and tailshaft off 1.any suggestions?
have heard people have this problem when they run a solid tranny mount, or only a front plate with no mid plate and solid tranny mount, or sometimes no mid plate and lots of hp
I don't think that's enough. Too much hanging weight between the two mounting spots. You need a midplate, but don't go solid on the trans. Big trouble there! JMO