Hilborn stack injection setup for SBC

Old 12-11-2009, 11:12 AM
  #1  
racerroo1
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Jul 2009
Posts: 3
Default Hilborn stack injection setup for SBC

just got an intake for my 360 chevy and need a recomendation for Nozzle size for Alcohol. the motor is 12.5 to 1, .590 lift roller cam, 6500 rpm redline, #0 pump 2-3/16 throat stacks. 2800lb? car with 4.56 gears, 33" tall tires, powerglide with 3200rpm stall. hoping to get 450-500 HP out of the motor
this is my first attemp at mechanical fuel injection and will take any advice available. Thanks guys
Racerroo
racerroo1 is offline  
Old 12-11-2009, 03:57 PM
  #2  
zipper06
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: La.
Posts: 2,890
Default

16AS would probable work best, but you coulds also run 14's or 18's. We run 18 AS but with a little larger size injection. Definately not smaller than 14AS.

JMO

Zip.
zipper06 is offline  
Old 12-11-2009, 05:16 PM
  #3  
racerroo1
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Jul 2009
Posts: 3
Default

zipper did i readsomewhere you run 434's? any recomendation on jets?
thanks
racerroo1 is offline  
Old 12-11-2009, 08:26 PM
  #4  
zipper06
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: La.
Posts: 2,890
Default

Originally Posted by racerroo1
zipper did i readsomewhere you run 434's? any recomendation on jets?
thanks
yes on the 434's, i have some friends who also runs them. We run everything from 355's to 434's on stacks and alcohol.
With the "0" pump and 16 AS nozzles is .075, that will put you within .010 either way with a 360" motor. Set the High Speed lean out at 60 lbs on the leak down and if you have an idle bypass set it at 15 lbs. or less.

Zip.
zipper06 is offline  
Old 12-12-2009, 04:39 AM
  #5  
racerroo1
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Jul 2009
Posts: 3
Default

Zip Thanks for the help.
racerroo1 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -