Need some Help with a windage tray
#1
Junior Member
SHOW GUEST
Thread Starter
Join Date: Mar 2009
Posts: 7
Need some Help with a windage tray
I am assembling my short block and am having trouble figuring out where each stud goes to mount my Moroso Louvered Windage Tray. I lost the instructions and need to know which holes the tray mounts with. I got a ARP stud kit and it sure seems like I am missing a stud but ARP tells me that I am not. I know this sounds stupid but I need some help cuz my windage tray is in a different motor about 100 miles away. Thanks in advance.
Here is the windage tray I have:
http://www.summitracing.com/parts/MOR-23020/
And here is the stud kit that I am using:
http://www.summitracing.com/parts/ARP-234-5601/
Here is the windage tray I have:
http://www.summitracing.com/parts/MOR-23020/
And here is the stud kit that I am using:
http://www.summitracing.com/parts/ARP-234-5601/
#2
#3
Junior Member
SHOW GUEST
Thread Starter
Join Date: Mar 2009
Posts: 7
Originally Posted by fla1976
Call the tech line listed on this site:
http://www.moroso.com/support/tech_support.asp
http://www.moroso.com/support/tech_support.asp