gm 12 bolt rear
11-12-2009, 08:40 PM
Senior Member
EXPERT BUILDER
Thread Starter
Join Date: Nov 2008
Posts: 263
gm 12 bolt rear
how do u tell if its out of a truck or car?
and how can u tell what gears are in it already?
the number on it is nf 3896888 dont know id thatl help or not
11-12-2009, 10:19 PM
Senior Member
RACING JUNKIE
Join Date: May 2006
Posts: 2,044
Only thing I came up with that number was it's a portable electric hammer drill :shock:
hope this helps, Cp
11-12-2009, 10:22 PM
Senior Member
RACING JUNKIE
Join Date: May 2006
Posts: 2,044
You can pull the cover, count the ring gear teeth, divide that number into the pinion teeth.
Ball park ratio.
E.G ---> 39/7 = 5.571429 or what is commonly refered to as a 5.57 gear
11-13-2009, 10:24 AM
Senior Member
EXPERT BUILDER
Thread Starter
Join Date: Nov 2008
Posts: 263
ok its a 3.73
but how do i tel if its out of a truck or car, its 6 lug, did they even put 6 lugs on cars?
11-13-2009, 10:31 AM
Senior Member
DYNO OPERATOR
Join Date: Apr 2008
Posts: 504
Truck has the smaller pinion shaft, car has the better larger pinion shaft and bearings. And if it has 6 lugs it aint no car axle if they are stock.
Bruce
11-13-2009, 12:01 PM
Senior Member
DYNO OPERATOR
Join Date: Mar 2008
Location: New Orleans,La
Posts: 515
car should have the rings for the 4 link bushing,or did the cars also have leafsprings too? :? :? :?
ops:
ops:
ops:
11-13-2009, 12:31 PM
Senior Member
DYNO OPERATOR
Join Date: Apr 2008
Posts: 504
Quote:
Originally Posted by montecarlo84
car should have the rings for the 4 link bushing,or did the cars also have leafsprings too? :? :? :?
ops:
ops:
ops:
Yes, The camaro, & Nova come to mind.
Bruce
11-14-2009, 05:45 AM
Senior Member
EXPERT BUILDER
Thread Starter
Join Date: Nov 2008
Posts: 263
ok cus the leaf mounts are at an angle on this 12 blt
and on my stock 10 bolt they r straight
11-14-2009, 03:42 PM
Senior Member
RACING JUNKIE
Join Date: Sep 2007
Posts: 4,137
Quote:
Originally Posted by cepx111
Only thing I came up with that number was it's a portable electric hammer drill :shock:
hope this helps, Cp
hahahahaha
11-16-2009, 09:19 AM
Senior Member
DYNO OPERATOR
Join Date: Feb 2009
Posts: 510
Quote:
Originally Posted by bowhay
ok cus the leaf mounts are at an angle on this 12 blt
and on my stock 10 bolt they r straight
A truck the leaf mounts would be on the top of the housing as a F body will be on the bottom of the housing.