Results 1 to 8 of 8

Thread: 565ci bbc tunnel ram carbs pump gas best choice?

  1. #1
    Junior Member APPRENTICE
    Join Date
    Aug 2003
    Posts
    20

    565ci bbc tunnel ram carbs pump gas best choice?

    thanks alot any exsperience or helpful advise.
    -i want to run a twin carb set up on a tunnel ram with regular pump gas on a 565ci bbc engine with 5 speed trans manual and solid roller cam aggresive radical cam.this is for street driving and quarter mile race maybe once a month.
    - i was thinking twin 750 range carbs?

  2. #2
    Administrator RACING JUNKIE bjuice's Avatar
    Join Date
    Apr 2003
    Location
    Greenville s.c.
    Posts
    3,239
    what do u mean by "Regular Pump "?
    Bjuice..

    "I'M YOUR HUCKLEBERRY ! "

  3. #3
    Junior Member APPRENTICE
    Join Date
    Aug 2003
    Posts
    20

    pump gas

    pump gas

    Quote Originally Posted by bjuice
    what do u mean by "Regular Pump "?

  4. #4
    Senior Member RACING JUNKIE BEAST477's Avatar
    Join Date
    Feb 2007
    Location
    Michigan
    Posts
    1,908
    Would that be 87 or 93 octane or E85 ??? :roll:

  5. #5
    Junior Member APPRENTICE
    Join Date
    Aug 2003
    Posts
    20

    93 octane pump gas street fuel

    Quote Originally Posted by BEAST477
    Would that be 87 or 93 octane or E85 ??? :roll:

  6. #6
    Administrator RACING JUNKIE bjuice's Avatar
    Join Date
    Apr 2003
    Location
    Greenville s.c.
    Posts
    3,239
    Big difference between 87/93 octane and E-85........You will be able to run more compression and a little more radical cam with E-85..you will also need the carbs blueprinted for e-85 and the Fuel pump E-85 Compatiable.

    E-85 is around 105 Octane. 8)

    what area do you live in ?
    Bjuice..

    "I'M YOUR HUCKLEBERRY ! "

  7. #7
    Senior Member EXPERT BUILDER
    Join Date
    Jan 2005
    Posts
    336
    only tunnel ram id use on a motor that big is a fabbed one(big dollars)if i was u id look at dart or super vic with a SINGLE 1150 or 1050 minimum cfm....


    if u want a motor that goes build with performance parts,if u want a bling bling motor,then go with the old school two fours

  8. #8
    and if its a dart Id port it


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy