Proform Scales
#1
Senior Member
MASTER BUILDER
Thread Starter
Join Date: Sep 2008
Location: Red Deer, AB Canada
Posts: 213
Proform Scales
Has anyone had any experience with the Proform Vehicle scales that Jegs sells? Are they any good? They are a reasonable price, $650 after the racer's discount. I assume they will weigh a car with 17" slicks as long as they are centered on the 15" pads.
Jegs
http://www.jegs.com/i/Proform/778/67650/10002/-1
Jegs
http://www.jegs.com/i/Proform/778/67650/10002/-1
#5
Senior Member
SENIOR BUILDER
Join Date: Feb 2005
Location: LAWTON MI
Posts: 113
First proform I ever bought was there adjustable shift light completely unreliable
Next was a TDC locator for a sbc spark plug hole would not thread in exchanged it for another one same problem
Lastly and I mean lastly was the valve spring presser gage that is used in a vice or drill press it did not even make it though one set springs before I started to get some fu#@ up numbers because the gage was and is still reading 50 something pound with no load on it
For me it’s been three strikes and proform is out
Next was a TDC locator for a sbc spark plug hole would not thread in exchanged it for another one same problem
Lastly and I mean lastly was the valve spring presser gage that is used in a vice or drill press it did not even make it though one set springs before I started to get some fu#@ up numbers because the gage was and is still reading 50 something pound with no load on it
For me it’s been three strikes and proform is out
#7
Senior Member
MASTER BUILDER
Join Date: Apr 2009
Posts: 175
Bungho must have serious stock in pro form pro top line etc etc, man your on the hunt for anyone to talk bad about any of there products! try buyin AMERICAN, yes you might have to save up a little longer but you are supporting american workers! sorry to go off topic! :wink:
#8
Senior Member
RACING JUNKIE
Join Date: Sep 2007
Location: orland pk il
Posts: 2,399
Originally Posted by whitey70ss
Bungho must have serious stock in pro form pro top line etc etc, man your on the hunt for anyone to talk bad about any of there products! try buyin AMERICAN, yes you might have to save up a little longer but you are supporting american workers! sorry to go off topic! :wink: