Page 1 of 5 123 ... LastLast
Results 1 to 10 of 43

Thread: Proform Scales

  1. #1
    Senior Member MASTER BUILDER
    Join Date
    Sep 2008
    Location
    Red Deer, AB Canada
    Posts
    213

    Proform Scales

    Has anyone had any experience with the Proform Vehicle scales that Jegs sells? Are they any good? They are a reasonable price, $650 after the racer's discount. I assume they will weigh a car with 17" slicks as long as they are centered on the 15" pads.

    Jegs
    http://www.jegs.com/i/Proform/778/67650/10002/-1

  2. #2
    Senior Member SENIOR BUILDER
    Join Date
    Feb 2005
    Location
    LAWTON MI
    Posts
    113
    Myself I have not had too many good experiences with proform
    Although I have not used or seen the scales yet

  3. #3
    Senior Member EXPERT BUILDER
    Join Date
    May 2004
    Posts
    298
    [quote="wrightway"]Myself I have not had too many good experiences with proform
    Although I have not used or seen the scales yet[/quote

    Care to elaborate?

  4. #4
    Senior Member RACING JUNKIE
    Join Date
    Feb 2004
    Location
    san antonio, texas
    Posts
    1,233
    i used the proform ring gear depth gauge, rod bolt stretch gauge,
    heavy duty bench spring tester, all worked great, have not used
    the scales, my experence, good luck :wink:

  5. #5
    Senior Member SENIOR BUILDER
    Join Date
    Feb 2005
    Location
    LAWTON MI
    Posts
    113
    First proform I ever bought was there adjustable shift light completely unreliable
    Next was a TDC locator for a sbc spark plug hole would not thread in exchanged it for another one same problem
    Lastly and I mean lastly was the valve spring presser gage that is used in a vice or drill press it did not even make it though one set springs before I started to get some fu#@ up numbers because the gage was and is still reading 50 something pound with no load on it
    For me it’s been three strikes and proform is out

  6. #6
    Does that come with a couple of free pork egg rolls?

  7. #7
    Senior Member MASTER BUILDER
    Join Date
    Apr 2009
    Posts
    175
    Bungho must have serious stock in pro form pro top line etc etc, man your on the hunt for anyone to talk bad about any of there products! try buyin AMERICAN, yes you might have to save up a little longer but you are supporting american workers! sorry to go off topic! :wink:

  8. #8
    Senior Member RACING JUNKIE
    Join Date
    Sep 2007
    Location
    orland pk il
    Posts
    2,429
    Quote Originally Posted by whitey70ss
    Bungho must have serious stock in pro form pro top line etc etc, man your on the hunt for anyone to talk bad about any of there products! try buyin AMERICAN, yes you might have to save up a little longer but you are supporting american workers! sorry to go off topic! :wink:
    ya forgot procomp too

  9. #9
    Senior Member MASTER BUILDER
    Join Date
    Apr 2009
    Posts
    175
    I meant to include them !

  10. #10
    Senior Member RACING JUNKIE DirkaDirka's Avatar
    Join Date
    Jul 2009
    Location
    Clarksville, TN
    Posts
    1,954
    This might be good........


    Its all fun and games till someone loses a nut!

    http://www.racingjunk.com/profile/400466


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Email us - Support@RacingJunk.com
Call us - 866.326.9227
Copyright © 2005-2016 RacingJunk.com All Rights Reserved.

Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacingJunk.com
Terms of Use, Classifieds Disclaimer, Privacy Policy, and Cookie Policy