Carb info for dragster

Old 10-07-2009, 04:36 PM
  #1  
ryan5920
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: May 2007
Posts: 4
Default Carb info for dragster

Lookin for some info, I'm new at racing a dragster, heres my dilema; I have a 358 with a .530 lift hydraulic cam, double hump 2.02 heads, victor Jr intake w/super sucker spacer. What Carb do I need that wont bog? any info on Demons, never had one?
ryan5920 is offline  
Old 10-07-2009, 09:13 PM
  #2  
TheYellaBrick
Senior Member
RACING JUNKIE
 
TheYellaBrick's Avatar
 
Join Date: Mar 2008
Location: Emmett, Idaho
Posts: 7,334
Default

Need a ton of more info;
- ALL the cam specs
- Compression ratio
- What has been done to the heads
- How old is the engine as it is now
- Trans specs
- Rear gear ratio
- Weight of car wet
- Rear tire diameter
- and anything else you can give us
TheYellaBrick is offline  
Old 10-07-2009, 10:23 PM
  #3  
cepx111
Senior Member
RACING JUNKIE
 
Join Date: May 2006
Posts: 2,044
Default

Holley HP 750 dp
cepx111 is offline  
Old 10-08-2009, 05:37 AM
  #4  
ryan5920
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: May 2007
Posts: 4
Default

cam specs are 244/254 @.050 .510/.530 lift hydraulic flat tappet, range 3500-7000 rpm. Flat top pistons 64cc chamber heads 2.02/1.60 valves stock runners, straight plug double hump no acc. holes, engine is fresh. 4:10 rear, 33" tire, power glide with brake, 5500 stahl, car maybe 1400lbs
ryan5920 is offline  
Old 10-09-2009, 05:19 AM
  #5  
ryan5920
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: May 2007
Posts: 4
Default

I am picking up a 750HP DP
Thanks
ryan5920 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -