Carb info for dragster
#1
Junior Member
SHOW GUEST
Thread Starter
Join Date: May 2007
Posts: 4
Carb info for dragster
Lookin for some info, I'm new at racing a dragster, heres my dilema; I have a 358 with a .530 lift hydraulic cam, double hump 2.02 heads, victor Jr intake w/super sucker spacer. What Carb do I need that wont bog? any info on Demons, never had one?
#2
Need a ton of more info;
- ALL the cam specs
- Compression ratio
- What has been done to the heads
- How old is the engine as it is now
- Trans specs
- Rear gear ratio
- Weight of car wet
- Rear tire diameter
- and anything else you can give us
- ALL the cam specs
- Compression ratio
- What has been done to the heads
- How old is the engine as it is now
- Trans specs
- Rear gear ratio
- Weight of car wet
- Rear tire diameter
- and anything else you can give us
#4
Junior Member
SHOW GUEST
Thread Starter
Join Date: May 2007
Posts: 4
cam specs are 244/254 @.050 .510/.530 lift hydraulic flat tappet, range 3500-7000 rpm. Flat top pistons 64cc chamber heads 2.02/1.60 valves stock runners, straight plug double hump no acc. holes, engine is fresh. 4:10 rear, 33" tire, power glide with brake, 5500 stahl, car maybe 1400lbs